FordParts
My Garage
My Account
Cart
OEM 2008 Ford Mustang Water Pump
H2O Pump- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Water Pumps found
2008 Ford Mustang Water Pump Part Number: 3L3Z-8501-CA
$49.93 MSRP: $80.55You Save: $30.62 (39%)Ships in 1 Business DayProduct Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Manufacturer Note: With M30 Hub
- Replaced by: 5L3Z-8501-AC
- Replaces: 5R3Z-8501-A, 5L2Z-8501-A, 1L2Z-8501-BB, F7UZ-8501-CA, F8AZ-8501-AA, PW-470, PW-387, YW7Z-8501-AA, AR3Z-8501-A, F4AZ-8501-A, AL3Z-8501-B, PW-499, YR3Z-8501-AB, YC2Z-8501-BA, PW-466, XC2Z-8501-BA
- Base No.: 8501
- Item Weight: 5.60 Pounds
- Item Dimensions: 6.6 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-8501-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Mustang Water Pump Part Number: 6L2Z-8501-A
$108.18 MSRP: $178.00You Save: $69.82 (40%)Product Specifications- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaced by: 6L2Z-8501-C
- Base No.: 8501
- Item Weight: 8.10 Pounds
- Item Dimensions: 14.7 x 8.1 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-8501-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Mustang Auxiliary Pump Part Number: 7R3Z-8501-B
$237.22 MSRP: $380.00You Save: $142.78 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pump Assembly - Water; Engine Auxiliary Water Pump; Water Pump
- Base No.: 8501B
- Item Weight: 3.10 Pounds
- Item Dimensions: 9.7 x 5.7 x 7.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-8501-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Mustang Water Pump Part Number: 7R3Z-8501-BB
$305.32 MSRP: $489.09You Save: $183.77 (38%)Product Specifications- Other Name: Pump Assembly - Water; Engine Water Pump
- Replaces: 7R3Z-8501-A, PW-471, 4G7Z-8501-AA, PW-438
- Base No.: 8501A
- Item Weight: 6.80 Pounds
- Item Dimensions: 7.8 x 8.5 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7R3Z-8501-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Mustang Water Pump
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Mustang Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Mustang Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Mustang Water Pump Parts Q&A
- Q: How to service the water pump on a 4.0L SOHC engine on 2008 Ford Mustang?A: The service process for the coolant pump requires draining engine coolant from a 4.0L SOHC engine first. The air cleaner outlet pipe should now be taken off. To start service on the coolant pump you should loosen bolts of the pulley while proceeding to remove the accessory drive belt. Remove the four coolant pump pulley bolts and the coolant pump pulley before installation while tightening them to 25 Nm (18 lb-ft). Remove the three coolant-related hoses from the thermostat housing-to-coolant pump hose, heater hose and radiator-to-coolant pump hose then set them outside. Use new gasket material to replace the old gasket during the removal process of twelve coolant pump bolts and the coolant pump. Use a metal surface cleaner and a suitable plastic or wooden scraper to clean the sealing surfaces. Application of new gasket when installing the pump requires bolt tightening to 10 Nm (89 lb-in). Reverse the removing steps to finish the installation of the coolants system and conduct the filling and bleaching procedures.