How to Service and Repair the Shift Interlock Solenoid on 2008 Ford Ranger?

To service the brake shift interlock actuator, remove the steering column assembly and the insert plate. Discard the actuator clip but do not replace it. Install the new actuator by reversing the steps, tightening the bolts to 9 Nm (80 lb-inch).

OEM 2008 Ford Ranger Shift Interlock Solenoid

Shift Lock Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shift Interlock Solenoid found

View related parts
2008 Ford Ranger Lock Actuator Part Number: F2DZ-3Z719-A
$59.93 MSRP: $74.12
You Save: $14.19 (20%)
ADD TO CART
Product Specifications
- Other Name: Solenoid Assembly; Shift Interlock Solenoid; Interlock Solenoid; Solenoid; Actuator
- Replaces: YC3Z-3Z719-AA
- Base No.: 3Z719
- Item Weight: 0.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F2DZ-3Z719-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2008 Ford Ranger Shift Interlock Solenoid

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Ranger Shift Interlock Solenoid available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Ranger Shift Interlock Solenoid as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Ranger Shift Interlock Solenoid Parts Q&A

Q: How to Service and Repair the Shift Interlock Solenoid on 2008 Ford Ranger?
A: To service the brake shift interlock actuator, remove the steering column assembly and the insert plate. Discard the actuator clip but do not replace it. Install the new actuator by reversing the steps, tightening the bolts to 9 Nm (80 lb-inch).