FordParts
My Garage
My Account
Cart
OEM 2008 Ford Taurus Brake Caliper
Caliper- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Brake Calipers found
2008 Ford Taurus Caliper, Front Driver Side Part Number: 5F9Z-2B121-BA
$85.58 MSRP: $118.39You Save: $32.81 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Driver Side
- Base No.: 2B120
- Item Weight: 6.30 Pounds
- Item Dimensions: 4.8 x 7.2 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-2B121-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Taurus Caliper, Front Passenger Side Part Number: 5F9Z-2B120-BA
$85.58 MSRP: $118.39You Save: $32.81 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Front Passenger Side
- Base No.: 2B120
- Item Weight: 6.60 Pounds
- Item Dimensions: 5.0 x 7.4 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F9Z-2B120-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Taurus Caliper, Rear Passenger Side Part Number: 8G1Z-2552-A
Product Specifications- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Passenger Side
- Replaced by: 6F9Z-2552-A
- Base No.: 2552
- Item Weight: 6.00 Pounds
- Item Dimensions: 7.7 x 7.2 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-2552-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Taurus Caliper, Rear Driver Side Part Number: 8G1Z-2553-A
Product Specifications- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: Warranty Eligible
- Position: Rear Driver Side
- Replaced by: 6F9Z-2553-A
- Base No.: 2552
- Item Weight: 6.00 Pounds
- Item Dimensions: 7.5 x 4.7 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-2553-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Taurus Brake Caliper
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Taurus Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Taurus Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Taurus Brake Caliper Parts Q&A
- Q: How to service and repair the front brake caliper on 2008 Ford Taurus?A: The brake caliper service process begins by removing brake pads followed by the brake caliper flow bolt while moving the brake hose to the side to discard the copper washers. Next, remove the brake caliper. The area between the brake caliper and brake pad needs cleaning with brake parts cleaner until you confirm all oil, grease, fluid, and other materials are removed since they can damage pad lining material. All brake pad kit devices should be installed on the brake caliper anchor plate with new brake pads as well as new spring clips. Mount the brake hose into position before installing the new brake caliper flow bolt along with its copper washers and tighten it to 30 Nm (22 lb-ft). Proper seat alignment of caliper pin boots will protect guide pins from damage during installation alongside maintaining correct brake hose orientation on the anchor plate. Screw and tighten the two caliper guide pin bolts at 60 Nm (44 lb-ft). Use steady force of 89-133 Nm (20-30 lb) on the brake pedal during one minute engine-operation to have brake pads grip the brake caliper. Conclude the process by testing brake function. Use only fresh brake fluid which matches manufacturer requirements since using previously drained fluid creates system contamination risks that can lead to personal injuries. Brake fluid should be washed off painted or plastic surfaces with water as soon as it appears. Consumers can obtain emergency medical data about Ford/Motorcraft vehicles by dialing 1-800-959-3673 while referring to the Material Safety Data Sheet (MSDS) when available for the specific product.
Related 2008 Ford Taurus Parts
2008 Ford Taurus Brake Pads
2008 Ford Taurus Brake Line
2008 Ford Taurus Wheel Hub
2008 Ford Taurus Parking Brake Cable
2008 Ford Taurus ABS Sensor
2008 Ford Taurus Brake Backing Plate
2008 Ford Taurus Brake Caliper Bracket
2008 Ford Taurus Brake Disc
2008 Ford Taurus Brake Dust Shields
2008 Ford Taurus Brake Master Cylinder
2008 Ford Taurus Hydraulic Hose
2008 Ford Taurus Spindle Nut