How to service the ignition coil-on-plug on 2008 Lincoln MKZ?

In order to service the ignition coil-on- plug, loosen the crank case vent tube and dismantle the upper intake manifold. Unscrew the six electrical connectors and make the coils come off in a twisting motion. Tighten the bolts with 7 Nm, check seals, change, and recheck, back the process, using dielectric grease, and reconnect.

OEM 2008 Lincoln MKZ Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2008 Lincoln MKZ Ignition Coil Part Number: 7T4Z-12029-E
$64.64 MSRP: $106.36
You Save: $41.72 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Coil
- Base No.: 12029
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.5 x 7.9 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-12029-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln MKZ Submodels:
- Base, Black Label | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

2008 Lincoln MKZ Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln MKZ Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln MKZ Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln MKZ Ignition Coil Parts Q&A

Q: How to service the ignition coil-on-plug on 2008 Lincoln MKZ?
A: In order to service the ignition coil-on- plug, loosen the crank case vent tube and dismantle the upper intake manifold. Unscrew the six electrical connectors and make the coils come off in a twisting motion. Tighten the bolts with 7 Nm, check seals, change, and recheck, back the process, using dielectric grease, and reconnect.