FordParts
My Garage
My Account
Cart
OEM 2008 Lincoln MKZ Parking Brake Cable
Emergency Parking Brake Release Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Parking Brake Cables found
2008 Lincoln MKZ Parking Brake Cable Part Number: AE5Z-2A815-E
$30.42 MSRP: $41.39You Save: $10.97 (27%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable; Rear Cable
- Replaces: 7E5Z-2A815-A, AE5Z-2A815-B, 9E5Z-2A815-B
- Base No.: 2853
- Item Weight: 3.70 Pounds
- Item Dimensions: 21.1 x 3.1 x 21.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AE5Z-2A815-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKZ Parking Brake Cable Part Number: AE5Z-2A815-D
$46.03 MSRP: $73.09You Save: $27.06 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Assembly - Parking Brake; Brake Cable; Rear Cable
- Replaces: 6E5Z-2A815-A, 9E5Z-2A815-A, 6E5Z-2A815-AA, AE5Z-2A815-A, AE5Z-2A815-C
- Base No.: 2853
- Item Weight: 3.80 Pounds
- Item Dimensions: 3.4 x 22.1 x 21.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AE5Z-2A815-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Lincoln MKZ Parking Brake Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln MKZ Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln MKZ Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Lincoln MKZ Parking Brake Cable Parts Q&A
- Q: How to service and repair the rear parking brake cable on 2008 Lincoln MKZ?A: Begin the rear parking brake cable repair by taking away the floor console followed by easing the parking brake control adjusting nut. The first step is to detach the rear parking brake cables from the equalizer and set the vehicle on a hoist using neutral. Place a suitable jackstand underneath the muffler along with the tailpipe while the two muffler and tailpipe isolators should be removed from the vehicle. Two catalytic converter-to-exhaust flexible pipe nuts need removal along with associated gasket removal before separating exhaust flexible pipe from catalytic converter. New nuts should be tightened to 40 Nm during installation (30 lb-ft). The heating shield can be removed after uninstalling six nuts along with two pin-type retaining elements. Remove both parking brake cable routing bracket nuts first and tighten them to 9 Nm (80 lb-inch) before proceeding to remove six parking brake cable routing bracket bolts that need to be torqued to 23 Nm (17 lb-ft) when reinstalling. Scrap both routing bracket clips and release the rear parking brake cables from the calipers before pulling out the cables. When reversing the removal process adjust the parking brake cable according to requirement. The isolators need lubricants without oil or grease components since such substances can damage rubber elements which might cause the exhaust hanger isolator to detach from the exhaust hanger bracket during driving.