How to remove and replace the front bumper cover on 2009 Ford Edge?

The front bumper cover can be removed successfully when the vehicle sits in NEUTRAL position on a hoist. The procedure starts with removing 2 bolts from the radiator grille top before moving on to remove 4 scrivets from the same region. First disconnect the 3 lower pin-type retainers and then remove the 6 fender splash shield screws that include 3 screws each side. You must uninstall the 2 screws positioned at the top of the radiator grille before moving to the 4 lower screws found on each side of the vehicle. The removal of side marker lamp electrical connectors and fog lamp electrical connectors should happen only when these components exist on the vehicle. To detach the front bumper cover you should carefully pull the corner away from its bracket positioning after finishing the procedure. The placement of the new bumper cover follows exactly the opposite steps used during removal.

OEM 2009 Ford Edge Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Bumpers found

View related parts
2009 Ford Edge Lower Cover, Front
Part Number: 9T4Z-17E994-APTM
$626.13 MSRP: $927.60
You Save: $301.47 (33%)
ADD TO CART
Product Specifications
- Other Name: Kit - Bumper Repair; Bumper Cover, Front Lower
- Manufacturer Note: Paint to match
- Position: Front Lower
- Base No.: 17D957B
- Item Weight: 10.40 Pounds
- Item Dimensions: 77.5 x 20.4 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9T4Z-17E994-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Sport | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Edge Impact Bar, Front
Part Number: AT4Z-17757-B
$162.25 MSRP: $200.31
You Save: $38.06 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Impact Bar, Front
- Position: Front
- Replaces: 7T4Z-17757-A, AT4Z-17757-A
- Base No.: 17757
- Item Weight: 15.80 Pounds
- Item Dimensions: 9.7 x 8.4 x 44.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AT4Z-17757-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Ford Edge Impact Bar, Rear
Part Number: BT4Z-17906-A
$153.97 MSRP: $189.56
You Save: $35.59 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Impact Bar, Rear
- Position: Rear
- Replaces: 9T4Z-17906-A, 7T4Z-17906-A
- Base No.: 17906
- Item Weight: 12.80 Pounds
- Item Dimensions: 52.0 x 5.7 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BT4Z-17906-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS
View related parts
2009 Ford Edge Lower Cover, Front
Part Number: 7T4Z-17D957-B
$236.08 MSRP: $257.73
You Save: $21.65 (9%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover Spacer Panel, Front Lower; Center Panel
- Position: Front Lower
- Base No.: 17D957B
- Item Weight: 3.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-17D957-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Edge Bumper Cover, Front Upper
Part Number: 7T4Z-17D957-APTM
$307.75 MSRP: $359.53
You Save: $51.78 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front, Front Upper
- Position: Front Upper
- Base No.: 17D957A
- Item Weight: 5.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-17D957-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Edge Lower Cover, Rear
Part Number: 9T4Z-17K835-BPTM
$774.97 MSRP: $1246.38
You Save: $471.41 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Valance Panel, Rear
- Manufacturer Note: Paint to match
- Position: Rear
- Base No.: 17K835C
- Item Weight: 9.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9T4Z-17K835-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Sport | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Edge Lower Cover, Rear
Part Number: 7T4Z-17K835-C
$128.26 MSRP: $186.70
You Save: $58.44 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Valance Panel, Rear
- Position: Rear
- Base No.: 17K835B
- Item Weight: 11.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-17K835-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Edge Lower Cover, Rear
Part Number: 7T4Z-17K835-D
$105.37 MSRP: $162.15
You Save: $56.78 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Valance Panel, Rear
- Position: Rear
- Base No.: 17K835B
- Item Weight: 10.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-17K835-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus | 6 Cyl 3.5 L GAS

2009 Ford Edge Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Edge Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Edge Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Edge Bumper Parts Questions & Experts Answers

Q: How to remove and replace the front bumper cover on 2009 Ford Edge?
A: The front bumper cover can be removed successfully when the vehicle sits in NEUTRAL position on a hoist. The procedure starts with removing 2 bolts from the radiator grille top before moving on to remove 4 scrivets from the same region. First disconnect the 3 lower pin-type retainers and then remove the 6 fender splash shield screws that include 3 screws each side. You must uninstall the 2 screws positioned at the top of the radiator grille before moving to the 4 lower screws found on each side of the vehicle. The removal of side marker lamp electrical connectors and fog lamp electrical connectors should happen only when these components exist on the vehicle. To detach the front bumper cover you should carefully pull the corner away from its bracket positioning after finishing the procedure. The placement of the new bumper cover follows exactly the opposite steps used during removal.