FordParts
My Garage
My Account
Cart
OEM 2009 Ford Escape Brake Master Cylinder
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Brake Master Cylinders found
2009 Ford Escape Master Cylinder Part Number: 9L8Z-2140-A
$147.65 MSRP: $242.95You Save: $95.30 (40%)Product Specifications- Other Name: Kit - Master Cylinder Repair; Brake Master Cylinder
- Base No.: 2140
- Item Weight: 2.50 Pounds
- Item Dimensions: 10.4 x 6.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-2140-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Escape Master Cylinder Part Number: 9L8Z-2140-C
$91.82 MSRP: $127.03You Save: $35.21 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Kit - Master Cylinder Repair; Brake Master Cylinder
- Base No.: 2140
- Item Weight: 2.50 Pounds
- Item Dimensions: 9.7 x 5.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-2140-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Escape Master Cylinder Part Number: 9M6Z-2140-A
$164.99 MSRP: $262.00You Save: $97.01 (38%)Product Specifications- Other Name: Kit - Master Cylinder Repair; Brake Master Cylinder
- Manufacturer Note: Service Kit
- Base No.: 2140
- Item Weight: 5.00 Pounds
- Item Dimensions: 9.3 x 8.1 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9M6Z-2140-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Escape Brake Master Cylinder
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Escape Brake Master Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Escape Brake Master Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Escape Brake Master Cylinder Parts Q&A
- Q: How to remove and replace the brake master cylinder on 2009 Ford Escape?A: The procedure to remove and install the brake master cylinder begins with disconnecting the electrical connector of the brake fluid level warning switch. A proper suction device should be utilized to collect brake fluid from the brake master cylinder reservoir. To replace the brake master cylinder of a manual transmission vehicle you should loosen the clamp before disconnecting the clutch hose from the reservoir then apply a stopper to the master cylinder feed hose. The brake master cylinder port involves two brake tube fittings that need removal before plugging the ports along with tightening them to 25 Nm (18 lb-ft) during installation. Thoroughly discard the two brake master cylinder nuts and install new ones with 25 Nm (18 lb-ft) torque during assembly. Put back the brake master cylinder assembly according to the removal procedure while performing a master cylinder bleed operation and clutch master cylinder bleed if needed. The system needs clean brake fluid which matches manufacturer standards to ensure protection from contamination while immediately washing water on brake fluid spills on painted or plastic surfaces.