How to remove and install the rear bumper cover on 2008 Ford Escape?

Disassembly of the rear bumper cover begins with unscrewing its two side lower screws and requires 5 Nm (44 lb-in) torque settings when reinstalling. The next step involves removing both the set of four center screws and set of two lower pushpins. First remove the splash shield's rear screws attached to the bumper cover then unfasten and tighten to 5 Nm (44 lb-in) the upper screws located on each side during reinstallation. First detach the alignment bumper bolts and alignment bumpers before the repair before retightening them to 8 Nm (71 lb-in) when fastening. The rear bumper cover should be removed only after suspending both parking aid system and trailer tow electrical connector services. The new bumper cover installation begins by following the reverse order of the removal process and certifying correct insertion into bumper slides.

OEM 2008 Ford Escape Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Bumpers found

View related parts
2008 Ford Escape Bumper Cover, Front Part Number: AL8Z-17D957-BPTM
$257.38 MSRP: $377.95
You Save: $120.57 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Replaces: 8L8Z-17D957-BPTM
- Base No.: 17D957
- Item Weight: 10.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL8Z-17D957-BPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Ford Escape Reinforcement, Front Part Number: 9L8Z-17757-A
$75.03 MSRP: $115.47
You Save: $40.44 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover Reinforcement Beam, Front; Bumper Cover Reinforcement, Front
- Position: Front
- Replaces: YL8Z-17757-AA, 5L8Z-17757-AA
- Base No.: 17757
- Item Weight: 8.30 Pounds
- Item Dimensions: 5.2 x 45.5 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Ford Escape Bumper Cover, Rear Part Number: 8L8Z-17K835-APTM
$206.63 MSRP: $225.58
You Save: $18.95 (9%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: 8L8Z-17K835-BPTM
- Base No.: 17K835
- Item Weight: 10.10 Pounds
- Item Dimensions: 137.7 x 50.5 x 24.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-17K835-APTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2008 Ford Escape Bumper Cover, Front Part Number: 8L8Z-17D957-CPTM
$326.46 MSRP: $359.54
You Save: $33.08 (10%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 10.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-17D957-CPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2008 Ford Escape Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Escape Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Escape Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Escape Bumper Parts Q&A

Q: How to remove and install the rear bumper cover on 2008 Ford Escape?
A: Disassembly of the rear bumper cover begins with unscrewing its two side lower screws and requires 5 Nm (44 lb-in) torque settings when reinstalling. The next step involves removing both the set of four center screws and set of two lower pushpins. First remove the splash shield's rear screws attached to the bumper cover then unfasten and tighten to 5 Nm (44 lb-in) the upper screws located on each side during reinstallation. First detach the alignment bumper bolts and alignment bumpers before the repair before retightening them to 8 Nm (71 lb-in) when fastening. The rear bumper cover should be removed only after suspending both parking aid system and trailer tow electrical connector services. The new bumper cover installation begins by following the reverse order of the removal process and certifying correct insertion into bumper slides.