FordParts
My Garage
My Account
Cart
OEM 2009 Ford F-250 Super Duty Crankshaft Position Sensor
Engine Crankshaft Position Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Crankshaft Position Sensors found
2009 Ford F-250 Super Duty Crankshaft Position Sensor Part Number: 1W7Z-6C315-AB
$41.11 MSRP: $65.27You Save: $24.16 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Sensor asy. (Crankshaft position) #1W7E 6C315-AA
- Replaces: 1W7Z-6C315-AA
- Base No.: 6C315
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.1 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6C315-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford F-250 Super Duty Crankshaft Position Sensor Part Number: 3C3Z-6C315-AA
$53.04 MSRP: $87.27You Save: $34.23 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor - Crankshaft Position - Cps
- Base No.: 6C315
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3C3Z-6C315-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford F-250 Super Duty Crankshaft Position Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-250 Super Duty Crankshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-250 Super Duty Crankshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford F-250 Super Duty Crankshaft Position Sensor Parts Q&A
- Q: How to Service the Crankshaft Position Sensor on 2009 Ford F-250 Super Duty?A: The crankshaft position sensor service commences with placing the vehicle in neutral position while on a hoist. First disconnect the accessory drive belt after which you need to remove three bolts securing the A/C compressor before setting it aside. The service of the CKP sensor starts by removing both its electrical connector and the holding bolt which secures it. Tighten the new sensor to 10 Nm (89 lb-in) using the correct torque values and apply clean engine oil for lubricating the O-ring seal before installation. Reinstall the A/C compressor after securing its bolts to 25 Nm (18 lb-ft) torque and move forward with the reverse order of removal.