How to Service and Repair an Y-Exhaust Pipe on Gasoline Engines on 2009 Ford F-350 Super Duty?

Install the vehicle on a hoist to service and repair the exhaust Y-pipe by setting it in NEUTRAL position. Remove the two exhaust Y-pipe flange bolts after disconnecting both Heated Oxygen Sensor (HO2S) and Catalyst Monitor Sensor (CMS) electrical connectors. The four exhaust manifold-to-exhaust Y-pipe nuts must be removed together with the exhaust Y-pipe assembly under assistance while discarding the used nuts. To begin fitting the new exhaust Y-pipe start by placing the component into the vehicle before torquing four new exhaust Y-pipe-to-exhaust manifold nuts and then attaching two exhaust Y-pipe flange bolts loosely. Climb into position for adjustment and then initiate nut tightening according to this pattern: lower LH nut to 20 Nm (177 lb-in), upper LH nut to 40 Nm (30 lb-ft), and another tightening session on the lower LH nut to 40 Nm (30 lb-ft). Execute this procedure for all nuts before moving on. The next part of this process requires the RH exhaust manifold-to-exhaust Y-pipe nuts to be tightened by starting with the lower RH nut to 20 Nm (177 lb-in) followed by the upper RH nut to 40 Nm (30 lb-ft), then finishing with the lower RH nut at 40 Nm (30 lb-ft). The last step includes clamping the Y-pipe flange bolts at 40 Nm (30 lb-ft) while restoring HO2S and CMS electrical connectors. An exhaust system alignment procedure should be done when the exhaust system isolators show any load other than zero.

OEM 2009 Ford F-350 Super Duty Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Exhaust Pipes found

View related parts
2009 Ford F-350 Super Duty Intermediate Pipe, Front
Part Number: 7C3Z-5A212-SC
$161.22 MSRP: $210.15
You Save: $48.93 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Exhaust Pipe Connector; Intermed Pipe; Pipe - Exhaust - Front
- Position: Front
- Base No.: 5A212
- Item Weight: 10.70 Pounds
- Item Dimensions: 6.1 x 8.2 x 36.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-5A212-SC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-350 Super Duty Front Pipe
Part Number: 7C3Z-5246-A
$253.45 MSRP: $333.28
You Save: $79.83 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe, Front; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit
- Position: Front
- Replaces: 7C3Z-5246-AC
- Base No.: 5246
- Item Weight: 10.10 Pounds
- Item Dimensions: 38.5 x 7.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-5246-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford F-350 Super Duty Exhaust Pipe, Front
Part Number: 7C3Z-6N646-B
$187.70 MSRP: $289.67
You Save: $101.97 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Intermediate Pipe, Front; Tail Pipe; Front Pipe; Duct - Air
- Position: Front
- Replaces: 7C3Z-6N646-A
- Base No.: 6N646
- Item Weight: 13.80 Pounds
- Item Dimensions: 40.8 x 10.9 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-6N646-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-350 Super Duty Intermediate Pipe, Center
Part Number: BC3Z-5A212-AL
$154.92 MSRP: $201.94
You Save: $47.02 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension - Exhaust Pipe; Exhaust Crossover Pipe, Center; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Intermed Pipe
- Manufacturer Note: Less Resonator
- Position: Center
- Replaces: 7C3Z-5A212-CA, BC3Z-5A212-F, BC3Z-5A212-AA
- Base No.: 5A212
- Item Weight: 8.60 Pounds
- Item Dimensions: 4.7 x 32.8 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC3Z-5A212-AL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2009 Ford F-350 Super Duty Intermediate Pipe, Center
Part Number: BC3Z-5A212-A
$122.17 MSRP: $159.25
You Save: $37.08 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension - Exhaust Pipe; Exhaust Crossover Pipe, Center; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Intermed Pipe
- Manufacturer Note: Less Resonator
- Position: Center
- Replaces: 7C3Z-5A212-AA
- Base No.: 5A212
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC3Z-5A212-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2009 Ford F-350 Super Duty Intermediate Pipe, Front
Part Number: 7C3Z-5A212-PC
$134.77 MSRP: $175.67
You Save: $40.90 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Intermed Pipe; Pipe - Exhaust - Front
- Position: Front
- Base No.: 5A212
- Item Weight: 8.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-5A212-PC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-350 Super Duty Intermediate Pipe, Front
Part Number: 7C3Z-5A212-NA
$107.31 MSRP: $139.88
You Save: $32.57 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Intermed Pipe; Pipe - Exhaust - Front
- Position: Front
- Base No.: 5A212
- Item Weight: 6.70 Pounds
- Item Dimensions: 29.6 x 5.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-5A212-NA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-350 Super Duty Intermediate Pipe, Front
Part Number: 7C3Z-5A212-MA
$71.18 MSRP: $97.91
You Save: $26.73 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Intermed Pipe; Pipe - Exhaust - Front
- Position: Front
- Base No.: 5A212
- Item Weight: 4.00 Pounds
- Item Dimensions: 6.9 x 5.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-5A212-MA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
2009 Ford F-350 Super Duty Intermediate Pipe
Part Number: BC3Z-5A212-C
Product Specifications
- Other Name: Extension - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Intermed Pipe
- Item Weight: 3.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC3Z-5A212-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford F-350 Super Duty Tailpipe Extension
Part Number: 8C3Z-5K238-A
Product Specifications
- Other Name: Extension - Exhaust Pipe; Exhaust Tail Pipe Tip; Exhaust System; Exhaust Pipe; Tail Pipe
- Manufacturer Note: Chrome Finish
- Replaces: 8C3Z-5255-A
- Base No.: 5202
- Item Weight: 3.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-5K238-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford F-350 Super Duty Intermediate Pipe, Front
Part Number: 7C3Z-5A212-BA
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Intermed Pipe; Pipe - Exhaust - Front
- Position: Front
- Base No.: 5A212
- Item Weight: 6.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-5A212-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS

2009 Ford F-350 Super Duty Exhaust Pipe

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford F-350 Super Duty Exhaust Pipe available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford F-350 Super Duty Exhaust Pipe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford F-350 Super Duty Exhaust Pipe Parts Questions & Experts Answers

Q: How to Service and Repair an Y-Exhaust Pipe on Gasoline Engines on 2009 Ford F-350 Super Duty?
A: Install the vehicle on a hoist to service and repair the exhaust Y-pipe by setting it in NEUTRAL position. Remove the two exhaust Y-pipe flange bolts after disconnecting both Heated Oxygen Sensor (HO2S) and Catalyst Monitor Sensor (CMS) electrical connectors. The four exhaust manifold-to-exhaust Y-pipe nuts must be removed together with the exhaust Y-pipe assembly under assistance while discarding the used nuts. To begin fitting the new exhaust Y-pipe start by placing the component into the vehicle before torquing four new exhaust Y-pipe-to-exhaust manifold nuts and then attaching two exhaust Y-pipe flange bolts loosely. Climb into position for adjustment and then initiate nut tightening according to this pattern: lower LH nut to 20 Nm (177 lb-in), upper LH nut to 40 Nm (30 lb-ft), and another tightening session on the lower LH nut to 40 Nm (30 lb-ft). Execute this procedure for all nuts before moving on. The next part of this process requires the RH exhaust manifold-to-exhaust Y-pipe nuts to be tightened by starting with the lower RH nut to 20 Nm (177 lb-in) followed by the upper RH nut to 40 Nm (30 lb-ft), then finishing with the lower RH nut at 40 Nm (30 lb-ft). The last step includes clamping the Y-pipe flange bolts at 40 Nm (30 lb-ft) while restoring HO2S and CMS electrical connectors. An exhaust system alignment procedure should be done when the exhaust system isolators show any load other than zero.