OEM 2009 Ford Focus Clutch Slave Cylinder

2009 Ford Focus Clutch Slave Cylinder Parts Q&A

• Q: How to remove and replace the clutch slave cylinder on 2009 Ford Focus?

  A: Start by reading the cautionary information displayed on the product label before obtaining emergency medical advice while seeking advice for replacing the clutch slave cylinder. Following instructions on Material Safety Data Sheets (MSDS) should be the first step before beginning since performing the steps in the incorrect order can cause serious harm to a person. While executing this task avoid distributing brake fluid onto painted surfaces or plastics because this could trigger considerable damage. In case fluid spills occur quickly wash the contaminated zone using water. Start the process by taking out the transaxle while cleaning both the input shaft and removing grease and foreign particles from it. The first step is to remove three clutch slave cylinder bolts and the clutch slave cylinder for disposal of the old component. When installing the new clutch slave cylinder avoid applying grease on any part of the component. Position the new clutch slave cylinder followed by installing the three bolts while torquing them to 89 lb-in (10 Nm). The system requires the transaxle to be installed while performing a bleeding process on the clutch hydraulic lines.