Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Ford Focus Transmission Pan

Trans Pan
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Transmission Pan found

  • 2009 Ford Focus Transmission Pan - XS4Z-7A194-AB
    2009 Ford Focus Transmission Pan Diagram - XS4Z-7A194-AB
    View related parts

    2009 Ford Focus Transmission Pan Part Number: XS4Z-7A194-AB

    $49.47 MSRP: $70.77
    You Save: $21.30 (31%)
    ADD TO CART
    Product Specifications
    • Other Name: Pan Assembly - Transmission Oil; Transmission Oil Pan; Automatic Transmission Oil Pan
    • Base No.: 7A194
    • Item Weight: 3.80 Pounds
    • Item Dimensions: 16.3 x 12.8 x 3.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: XS4Z-7A194-AB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford Focus Submodels:
    • LX, S, SE, SEL, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2009 Ford Focus Transmission Pan

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Focus Transmission Pan available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Focus Transmission Pan as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Focus Transmission Pan Parts Q&A

  • Q: How to service and repair the 4F27E Transmission Pan on 2009 Ford Focus?
    A: Service and repair of the 4F27E transmission fluid pan starts by securely hoisting the vehicle in neutral gear position. The transmission fluid pan contains its fill of fluid which makes preventing removal before draining impossible. First remove all pan bolts and cut the sealer bead with an accepted tool. Two steps follow the removal process: a complete silicone removal from the transmission fluid pan as well as the transaxle case surfaces using metal surface prep. When installing the pan apply 1.5 mm (0.059 in) thick bead of sealer while keeping the usage within specified parameters to avoid transaxle internal issues. Install first the clean transmission fluid then secure the transmission fluid pan by tightening its bolts until they reach 10 Nm (89 lb-in) torque. Next lower the vehicle.

Related 2009 Ford Focus Parts

Alternate Year Models

+
2008 Ford Focus Transmission Pan 2010 Ford Focus Transmission Pan