How to Service the Oil Pressure Switch on 2009 Ford Focus?

The vehicle maintenance process for Engine Oil Pressure (EOP) switch starts with hoisting the vehicle in neutral position. Start by disconnecting the electrical connector which leads to the EOP switch before extracting the switch. Install the new EOP switch by using thread sealant on the threads and torquing it to 15 Nm (133 lb-in). The installation should be finalized by conducting the opposite steps of removal.

OEM 2009 Ford Focus Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2009 Ford Focus Pressure Switch Part Number: G1CZ-9278-B
$24.30 MSRP: $38.58
You Save: $14.28 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Sending Unit; Oil Pressure Switch
- Replaces: 1U5Z-9278-GA, SW-6376, 6U5Z-9278-G, G1CZ-9278-A
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.7 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: G1CZ-9278-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Focus Submodels:
- S, SE, SEL, SES | 4 Cyl 2.0 L GAS

2009 Ford Focus Oil Pressure Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Focus Oil Pressure Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Focus Oil Pressure Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Focus Oil Pressure Switch Parts Q&A

Q: How to Service the Oil Pressure Switch on 2009 Ford Focus?
A: The vehicle maintenance process for Engine Oil Pressure (EOP) switch starts with hoisting the vehicle in neutral position. Start by disconnecting the electrical connector which leads to the EOP switch before extracting the switch. Install the new EOP switch by using thread sealant on the threads and torquing it to 15 Nm (133 lb-in). The installation should be finalized by conducting the opposite steps of removal.