FordParts
My Garage
My Account
Cart
OEM 2009 Ford Mustang Door Latch Assembly
Door Latch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Door Latch Assemblys found
2009 Ford Mustang Lock Actuator, Rear Passenger Side Part Number: 6L2Z-78218A42-B
$9.94 MSRP: $15.38You Save: $5.44 (36%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Actuator Assembly; Door Lock Actuator Motor, Front Right, Rear Right; Door Latch Assembly.; Actuator
- Position: Rear Passenger Side
- Replaces: 4L2Z-78218A42-AB, 6L2Z-78218A42-A, 6L2Z-78218A42-AA, 6L2Z-78218A42-AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-78218A42-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Mustang Lock Actuator, Front Driver Side Part Number: 6L2Z-78218A43-B
$12.10 MSRP: $18.73You Save: $6.63 (36%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Actuator Assembly; Door Lock Actuator Motor, Front Left, Rear Left; Door Latch Assembly.; Actuator
- Position: Front Driver Side
- Replaces: 4L2Z-78218A43-AA, 6L2Z-78218A43-AB, 6L2Z-78218A43-A, 6L2Z-78218A43-AA
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-78218A43-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Mustang Lock, Front Driver Side Part Number: 8R3Z-6321813-A
Product Specifications- Other Name: Latch; Door Latch Assembly, Front Left; Door Lock; Door Latch Assembly
- Manufacturer Note: Does Not Include Door Ajar Switch
- Position: Front Driver Side
- Base No.: <21812
- Item Weight: 1.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-6321813-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Latch; Door Latch Assembly, Front Right; Door Lock; Door Latch Assembly
- Manufacturer Note: Does Not Include Door Ajar Switch
- Position: Front Passenger Side
- Base No.: <21812
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-6321812-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Mustang Door Latch Assembly
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Mustang Door Latch Assembly available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Mustang Door Latch Assembly as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Mustang Door Latch Assembly Parts Q&A
- Q: How to remove and replace the front Door Latch Assembly on 2009 Ford Mustang?A: The process of changing or removing a front door latch starts with removing the door trim panel while placing watershield properly to the side. The exterior door handle actuating rod should be disconnected followed by disassembly of the three door latch bolts and separation of the manual lock rod. Follow the procedure to remove and install the front door latch by first detaching the door lock cylinder actuating rod and the two wiring harness electrical connectors when necessary. First disconnect the cable cover through pin-type retainer detaching and releasing its clip. When disconnecting the interior door handle actuating cable maintain a strict habit of preventing it from folding over. Install the new door latch within the door gateway after which route the interior door handle actuating cable into position followed by securing the cable cover along with attaching the two wiring harness electrical connectors. The door lock cylinder actuating rod and the manual lock rod can be connected when needed before installing three door latch bolts with a torque of 9 Nm (80 lb-in). Before attaching to the retaining clip you should align the door latch into a centered position through upward rod pressure on the exterior door handle. Seal the watershield and replace the door trim panel as the last step.