How to service and repair the Front Cross-Member for the transmission on 2009 Ford Mustang?

During front crossmember transmission service and repair tasks always reposition the transmission crossmember in its original removal orientation to prevent driveline angle modifications which generate acceleration shuddering. Start by setting the vehicle to NEUTRAL gear before hoisting the vehicle. A suitable transmission jack should support the transmission before you remove the transmission support insulator bolt and transmission crossmember bolts which will detach the crossmember. The V6 crossmember installation requires placing the hump side down but the V8 crossmember needs to position the hump side upward. The team should loosely fasten the transmission support insulator bolt along with the transmission crossmember bolts. The transmission support insulator needs neutralization using three movement protocols that include sliding it forward, backward and side ways until equal gaps form between the insulator and the crossmember. After neutralizing the transmission support insulator tighten its bolt to 70 Nm (52 lb-ft) while the crossmember bolts need to be tightened to 63 Nm (46 lb-ft).

OEM 2009 Ford Mustang Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Front Cross-Members found

View related parts
2009 Ford Mustang Engine Cradle, Front
Part Number: BR3Z-5C145-A
$341.18 MSRP: $501.00
You Save: $159.82 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Engine Cradle, Front; Suspension Crossmember
- Position: Front
- Base No.: 5C145
- Item Weight: 30.90 Pounds
- Item Dimensions: 48.5 x 30.3 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BR3Z-5C145-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, Boss 302, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 5.8 L GAS
View related parts
2009 Ford Mustang Lower Brace
Part Number: 4R3Z-5025-A
$61.21 MSRP: $98.45
You Save: $37.24 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cross Member Assembly; Engine Cradle Brace
- Base No.: 5025
- Item Weight: 2.80 Pounds
- Item Dimensions: 34.5 x 10.8 x 8.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4R3Z-5025-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, GT, Shelby GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Mustang Lower Crossmember, Front
Part Number: 9R3Z-5019-D
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Front Lower; Crossmember
- Position: Front Lower
- Replaces: 9R3Z-5019-B, 8R3Z-5019-B, 7R3Z-5019-A
- Base No.: 5019
- Item Weight: 20.30 Pounds
- Item Dimensions: 9.3 x 8.2 x 35.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9R3Z-5019-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, GT, Shelby GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Mustang Lower Crossmember, Front
Part Number: 9R3Z-5019-C
Product Specifications
- Other Name: Cross Member Assembly; Suspension Subframe Crossmember, Front Lower; Crossmember
- Position: Front Lower
- Replaces: 7R3Z-5019-AA, 8R3Z-5019-A, 9R3Z-5019-A
- Base No.: 5019
- Item Weight: 18.60 Pounds
- Item Dimensions: 34.5 x 10.8 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9R3Z-5019-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Bullitt, Shelby GT, Shelby GT500, Shelby GT500KR | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2009 Ford Mustang Crossmember
Part Number: 5R3Z-5C145-A
Product Specifications
- Other Name: Cross Member Assembly
- Base No.: 5C145
- Item Dimensions: 34.8 x 10.6 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-5C145-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Mustang Submodels:
- Base, Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2009 Ford Mustang Front Cross-Member

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Mustang Front Cross-Member available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Mustang Front Cross-Member as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Mustang Front Cross-Member Parts Questions & Experts Answers

Q: How to service and repair the Front Cross-Member for the transmission on 2009 Ford Mustang?
A: During front crossmember transmission service and repair tasks always reposition the transmission crossmember in its original removal orientation to prevent driveline angle modifications which generate acceleration shuddering. Start by setting the vehicle to NEUTRAL gear before hoisting the vehicle. A suitable transmission jack should support the transmission before you remove the transmission support insulator bolt and transmission crossmember bolts which will detach the crossmember. The V6 crossmember installation requires placing the hump side down but the V8 crossmember needs to position the hump side upward. The team should loosely fasten the transmission support insulator bolt along with the transmission crossmember bolts. The transmission support insulator needs neutralization using three movement protocols that include sliding it forward, backward and side ways until equal gaps form between the insulator and the crossmember. After neutralizing the transmission support insulator tighten its bolt to 70 Nm (52 lb-ft) while the crossmember bolts need to be tightened to 63 Nm (46 lb-ft).