FordParts
My Garage
My Account
Cart
OEM 2008 Ford Mustang EGR Tube
EGR Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 EGR Tubes found
2008 Ford Mustang Connector Pipe Part Number: 5R3Z-9E470-DA
Product Specifications- Other Name: Tube - Connecting; Exhaust Gas Recirculation (EGR) Tube
- Base No.: 9E470
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-9E470-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Mustang Tube Assembly Part Number: 5R3Z-9E469-GA
Product Specifications- Other Name: Tube - EGR Valve To Exhaust Manifold; Exhaust Gas Recirculation (EGR) Tube; EGR Tube; Tube
- Replaces: 5R3Z-9E469-FA
- Base No.: 9E469
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.0 x 11.2 x 36.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-9E469-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Mustang EGR Tube
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Mustang EGR Tube available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Mustang EGR Tube as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Mustang EGR Tube Parts Q&A
- Q: How to Service and Repair the EGR Tube in the Exhaust Gas Recirculation System on 2008 Ford Mustang?A: The service and repair of Exhaust Gas Recirculation (EGR) system module tube starts by taking out the battery tray in vehicles with the 5.4L 4V engine. When installing or replacing an EGR system module tube for the 4.0L SOHC engine or 5.4L 4V engine you should tighten the connection to 39 Nm (29 lb-ft) or 42 Nm (31 lb-ft) respectively. Unplug the EGR system module tube from where it connects to the exhaust manifold fitting after which remove the tube. Users should reinstall the tube while tightening it to 39 Nm (29 lb-ft) for 4.0L SOHC engines and 42 Nm (31 lb-ft) for 5.4L 4V engines before performing the complete reversal of installation steps.