How to service and repair the upper control arm on 2009 Ford Ranger?

Start the service of the upper control arm by placing the lower arm in proper position with the vehicle at its standard height on the curb. First remove the wheel and tire before positioning a suitable jack underneath the lower arm. It is crucial to secure the wheel spindle/knuckle from tilting before removing its pinch bolt and nut to avoid damaging components. After separation of the upper ball joint nut and pinch bolt discard them while disassembling the ball joint from the wheel spindle/knuckle. The next step requires removal of upper arm flag bolts and nuts as well as set shims before extracting the upper arm component. The nuts should remain loose at first and all original set shims must be properly positioned during installation. Narrowly insert two new upper arm flag bolts through the holes while adding shims between them. After this, install new nuts loosely on the flag bolts. Mount the upper ball joint while securing its new ball joint nut to 63 Nm (46 lb-ft). You should employ an appropriate tool to lift the front suspension lower arm until the reference marks between the lower arm and frame reach exact curb height. During the nut-tightening process keep the upper arm bolts steady as you apply torque to 133 Nm (98 lb-ft). Reinstall the wheel together with tire and perform front end alignment checks followed by required corrections.

OEM 2009 Ford Ranger Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Control Arms found

View related parts
2009 Ford Ranger Upper Control Arm, Front Driver Side Part Number: 8L5Z-3085-L
$108.18 MSRP: $178.00
You Save: $69.82 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly - Front Suspension; Front Left Upper Control Arm and Ball Joint Assembly.; Control Arm
- Position: Front Upper Driver Side
- Replaces: 6L5Z-3085-AA
- Base No.: 3083
- Item Weight: 6.90 Pounds
- Item Dimensions: 3.8 x 11.7 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L5Z-3085-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Upper Control Arm, Front Passenger Side Part Number: 8L5Z-3084-R
$107.30 MSRP: $176.55
You Save: $69.25 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly - Front Suspension; Front Right Upper Control Arm and Ball Joint Assembly.; Control Arm
- Position: Front Upper Passenger Side
- Replaces: 6L5Z-3084-AA
- Base No.: 3084
- Item Weight: 7.30 Pounds
- Item Dimensions: 3.9 x 11.4 x 15.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L5Z-3084-R
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Lower Control Arm, Front Passenger Side Part Number: 7L5Z-3078-A
$104.74 MSRP: $142.53
You Save: $37.79 (27%)
ADD TO CART
Product Specifications
- Other Name: Arm Assembly - Front Suspension; Front Right Lower Control Arm and Ball Joint Assembly; Control Arm
- Position: Front Lower Passenger Side
- Replaces: 6L5Z-3078-BA
- Base No.: 3078
- Item Weight: 20.40 Pounds
- Item Dimensions: 5.3 x 18.2 x 20.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-3078-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Upper Control Arm, Front Passenger Side Part Number: 6L5Z-3084-BA
$57.15 MSRP: $77.77
You Save: $20.62 (27%)
ADD TO CART
Product Specifications
- Other Name: Arm Assembly - Front Suspension; Front Right Upper Control Arm and Ball Joint Assembly.; Control Arm
- Position: Front Upper Passenger Side
- Replaces: 3L5Z-3084-DA
- Base No.: 3084
- Item Weight: 6.50 Pounds
- Item Dimensions: 3.7 x 9.6 x 15.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-3084-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Lower Control Arm, Front Driver Side Part Number: 7L5Z-3079-A
$112.63 MSRP: $189.09
You Save: $76.46 (41%)
ADD TO CART
Product Specifications
- Other Name: Arm Assembly - Front Suspension; Front Left Lower Control Arm and Ball Joint Assembly.; Control Arm
- Position: Front Lower Driver Side
- Replaces: 6L5Z-3079-BA
- Base No.: 3079
- Item Weight: 21.70 Pounds
- Item Dimensions: 5.8 x 20.5 x 18.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-3079-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Upper Control Arm, Front Driver Side Part Number: 6L5Z-3085-BA
Product Specifications
- Other Name: Arm Assembly - Front Suspension; Control Arm and Ball Joint Assembly; Front Left/Right Upper.; Control Arm
- Position: Front Upper Driver Side
- Replaces: 3L5Z-3085-DA
- Base No.: 3084
- Item Weight: 6.10 Pounds
- Item Dimensions: 3.7 x 9.9 x 16.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-3085-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Lower Control Arm, Front Driver Side Part Number: 6L5Z-3079-AA
Product Specifications
- Other Name: Arm Assembly - Front Suspension; Front Left Lower Control Arm and Ball Joint Assembly.; Control Arm
- Position: Front Lower Driver Side
- Replaces: 3L5Z-3079-AA
- Base No.: 3078
- Item Weight: 23.70 Pounds
- Item Dimensions: 5.3 x 19.4 x 21.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-3079-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Lower Control Arm, Front Passenger Side Part Number: 6L5Z-3078-AA
Product Specifications
- Other Name: Arm Assembly - Front Suspension; Front Right Lower Control Arm and Ball Joint Assembly; Control Arm
- Position: Front Lower Passenger Side
- Replaces: 3L5Z-3078-AA
- Base No.: 3078
- Item Weight: 21.20 Pounds
- Item Dimensions: 5.3 x 20.0 x 21.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-3078-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2009 Ford Ranger Control Arm

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Control Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Control Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Ranger Control Arm Parts Q&A

Q: How to service and repair the upper control arm on 2009 Ford Ranger?
A: Start the service of the upper control arm by placing the lower arm in proper position with the vehicle at its standard height on the curb. First remove the wheel and tire before positioning a suitable jack underneath the lower arm. It is crucial to secure the wheel spindle/knuckle from tilting before removing its pinch bolt and nut to avoid damaging components. After separation of the upper ball joint nut and pinch bolt discard them while disassembling the ball joint from the wheel spindle/knuckle. The next step requires removal of upper arm flag bolts and nuts as well as set shims before extracting the upper arm component. The nuts should remain loose at first and all original set shims must be properly positioned during installation. Narrowly insert two new upper arm flag bolts through the holes while adding shims between them. After this, install new nuts loosely on the flag bolts. Mount the upper ball joint while securing its new ball joint nut to 63 Nm (46 lb-ft). You should employ an appropriate tool to lift the front suspension lower arm until the reference marks between the lower arm and frame reach exact curb height. During the nut-tightening process keep the upper arm bolts steady as you apply torque to 133 Nm (98 lb-ft). Reinstall the wheel together with tire and perform front end alignment checks followed by required corrections.