FordParts
My Garage
My Account
Cart
OEM 2009 Ford Ranger Fan Shroud
Radiator Fan Shroud- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Fan Shrouds found
2009 Ford Ranger Fan Shroud Part Number: 1L2Z-8146-FA
$124.81 MSRP: $181.67You Save: $56.86 (32%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud; Shroud
- Base No.: 8146
- Item Weight: 5.80 Pounds
- Item Dimensions: 27.8 x 27.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-8146-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Ranger Shroud Part Number: 5L5Z-8146-A
$173.85 MSRP: $236.58You Save: $62.73 (27%)Product Specifications- Other Name: Shroud - Radiator Fan; Engine Cooling Fan Shroud; Fan Shroud
- Replaces: 5L5Z-8146-AA
- Base No.: 8146
- Item Weight: 8.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L5Z-8146-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Ranger Fan Shroud
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Fan Shroud available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Fan Shroud as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Ranger Fan Shroud Parts Q&A
- Q: How to Service the Fan Shroud and Cooling Fan Motor on a 2.3L Engine on 2009 Ford Ranger?A: During cooling fan motor and shroud servicing of a 2.3L engine you must disconnect the ground cable from the battery if A/C exists. Begin by disconnecting the electric cooling fan electrical connector when possible and then moving to disconnect the ACL outlet tube. Secure the power steering fluid reservoir by removing its three bolts but position it aside while you should tighten each bolt to 6 Nm when reinstalling. Lift the cooling fan shroud assembly with the electric fan when you remove its mounting bolts before replacing it to 7 Nm (62 lb-in) torque. Users should detach the electric cooling fan by unfastening its three bolts and then install it according to a torque specification of 8 Nm (71 lb-in). The procedure allows additional disassembly by removing the two bolts, electric cooling fan bracket and three electric cooling fan nuts from the fan shroud but the reinstallation should be done with 8 Nm (71 lb-in) torque. The procedure ends when the removal steps get inverted.