Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
Edge, FX4, Lariat, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
Other Name: Bulb; Turn Signal & Parking Light Bulb, Front; Rear; Side Marker; Headlight; Back Up; Brake; Tail Light Bulbs; Backup Lamp Bulb; Signal Lamp Bulb; Parking Lamp Bulb; Stop Lamp Bulb; Exterior Bulbs
Position: Front
Replaces: F5AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: YR3Z-13466-AD
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
2009 Ford Ranger Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Ranger Headlight Bulb Parts Q&A
Q: How to Safely and Correctly Service the Headlight Bulb on 2009 Ford Ranger?
A: Begin by handling the headlamp bulb base only since the bulb maintains pressure with gas inside and a broken glass envelope can occur through envelope scratches or drops. Before placing a new headlamp bulb the device should remain uninstalled until immediately before installation because airborne contaminants can damage the assembly. The first step requires you to take out the headlamp assembly. The headlamp bulb retainer requires a counterclockwise motion of one-eighth rotation to come loose before allowing you to remove both the retainer and bulb. Turn the installation procedure for the new bulb around to carry it out. Keep the headlamps off whenever the bulb remains uninstalled because this practice could harm components.