How to service the rear seat cushion in a 2-Door SuperCab on 2009 Ford Ranger?

The service procedure for the rear seat cushion of a 2-Door SuperCab starts by removing the assist handle through cover screw removal followed by screw unscrewing and assist handle separation. To detach the seat door trim cover you must first remove its supporting screw followed by unclamping the retainers before reactivating the pin-type retainers for complete removal of the trim cover. The hog rings should be taken out first along with the seat base separation from the frame before removing the trim cover. The installation process should begin with checking that safety belt webbing remains untwisted while safety belts and buckles remain reachable by occupants. When finishing the work reverse the steps used for disassembly.

OEM 2009 Ford Ranger Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Seat Cushions found

View related parts
2009 Ford Ranger Seat Cushion Pad, Front Driver Side Part Number: 5L5Z-10632A23-AA
$162.38 MSRP: $236.37
You Save: $73.99 (32%)
ADD TO CART
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion Pad, Front, Front Left; Seat Cushion
- Position: Front Driver Side
- Base No.: <632A22
- Item Weight: 3.10 Pounds
- Item Dimensions: 27.6 x 16.3 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L5Z-10632A23-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Seat Cushion Pad, Front Passenger Side Part Number: 8L5Z-15632A22-B
Product Specifications
- Other Name: Pad; Seat Cushion Pad, Front Right; Seat Cushion
- Manufacturer Note: Includes Seat Pad, Seat Pan/Frame And Occupant Weight Sensor
- Position: Front Passenger Side
- Replaces: 7L5Z-15632A22-C
- Base No.: <632A22
- Item Weight: 5.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L5Z-15632A22-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- FX4, Sport, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Seat Back Pad, Front Part Number: 6L5Z-1064810-A
Product Specifications
- Other Name: Pad - Seat Back; Seat Back Cushion, Front Left, Front Right
- Manufacturer Note: RH/LH
- Position: Front
- Base No.: <64810
- Item Weight: 10.50 Pounds
- Item Dimensions: 41.6 x 20.8 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-1064810-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Seat Cushion Pad, Front Passenger Side Part Number: 5L5Z-10632A22-AA
Product Specifications
- Other Name: Pad; Seat Cushion Pad, Front, Front Left, Front Right; Seat Cushion
- Manufacturer Note: RH/LH
- Position: Front Passenger Side
- Base No.: <632A22
- Item Weight: 4.40 Pounds
- Item Dimensions: 28.4 x 14.3 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L5Z-10632A22-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2009 Ford Ranger Seat Cushion

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Seat Cushion available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Seat Cushion as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Ranger Seat Cushion Parts Q&A

Q: How to service the rear seat cushion in a 2-Door SuperCab on 2009 Ford Ranger?
A: The service procedure for the rear seat cushion of a 2-Door SuperCab starts by removing the assist handle through cover screw removal followed by screw unscrewing and assist handle separation. To detach the seat door trim cover you must first remove its supporting screw followed by unclamping the retainers before reactivating the pin-type retainers for complete removal of the trim cover. The hog rings should be taken out first along with the seat base separation from the frame before removing the trim cover. The installation process should begin with checking that safety belt webbing remains untwisted while safety belts and buckles remain reachable by occupants. When finishing the work reverse the steps used for disassembly.