Manufacturer Note: Less pump #17664, washer tank only, refer to 8A080 for coolant tank, with 2.3, without low fluid sensor
Base No.: 17618
Item Weight: 2.00 Pounds
Item Dimensions: 15.5 x 11.6 x 11.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 1L5Z-17618-AA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
Edge, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
2009 Ford Ranger Washer Reservoir
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Washer Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Washer Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Ranger Washer Reservoir Parts Questions & Experts Answers
Q: How to service the windshield washer reservoir and pump for the 2.3L engine on 2009 Ford Ranger?
A: Begin by reading all cautionary information from the product label before seeking advice from a physician for emergencies during windshield washer reservoir and pump servicing for the 2.3L engine. Before disconnecting the electrical components of the washer pump and wiring harness retainer you should drain the windshield washer reservoir to avoid spills. The Air Cleaner (ACL) assembly needs removal before you can access the two reservoir bolts and two reservoir nuts which should receive a torque setting of 6 Nm (53 lb-in) after installation. First disconnect the windshield washer reservoir-to-coolant reservoir stud and place the coolant reservoir out of the way to reach the washer reservoir. Use caution when disconnecting the windshield washer hose from the washer pump to prevent grommet injury since removing the washer pump from the reservoir. Follow the reverse installation procedure to finish the service.