My Garage
Cart

OEM 2009 Ford Ranger Voltage Regulator

Adjustable Voltage Regulator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Voltage Regulator found

  • 2009 Ford Ranger Voltage Regulator Diagram - F1DZ-10C359-A
    View related parts
    Product Specifications
    • Other Name: Regulator And Brush; Brush & Holder; Regulator Assembly; Brushes; Regulator; Regulator And Brush Holder Assembly
    • Replaces: FODZ-10316-A
    • Base No.: 10C359
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 3.9 x 2.4 x 2.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: F1DZ-10C359-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2009 Ford Ranger Submodels:
    • Custom, Edge, FX4, S, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.9 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2009 Ford Ranger Voltage Regulator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Voltage Regulator available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Voltage Regulator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Ranger Voltage Regulator Parts Q&A

  • Q: How to service the voltage regulator on 2009 Ford Ranger?
    A: The voltage regulator service demands generator removal as the first step. The next procedure requires removal of four screws that hold the generator voltage regulator assembly together with its generator brush and terminal holder. The assembly of the voltage regulator requires tightening the screws to 3 Nm while using 27 lb-in torque measurement. Before generator brush assembly it is critical to insert a wire specifically plastic into the holding wire insertion hole of the brush to keep the generators stacks properly aligned. The correct generator operation requires users to remove the wire just before starting their vehicle. The last step ends the installation process by performing the reverse action of removal.