How to service and repair the front Wheelhouse liner on 2009 Ford Ranger?

Service and repair of the front fender liner requires disconnecting the electrical connector locators of the RH front fender splash shield and the vacuum lines of the LH front fender splash shield from their respective storage reservoir. Van.installations must start by removing three scrivets from within the splash shield front then moving on to the lower front splash shield bolts and nuts. Users must remove a bolt with nut from the LH front fender splash shield yet they should detach two bolts from the RH front fender splash shield. The RH front fender splash shield requires removal of its 5 pushpins that connect to the inner splash shield before extracting the inner splash shield. Men must take out the scrivet from the lower rear splash shield followed by removal of the front fender splash shield. The process completion follows the reverse sequence of removal procedures.

OEM 2009 Ford Ranger Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheelhouses found

View related parts
2009 Ford Ranger Splash Shield, Front Passenger Side Part Number: 7L5Z-16102-A
$14.98 MSRP: $21.25
You Save: $6.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield; Fender Splash Shield, Front Right; Fender Splash Shield
- Position: Front Passenger Side
- Replaces: F87Z-16102-AA
- Base No.: 16102
- Item Weight: 4.30 Pounds
- Item Dimensions: 10.4 x 31.8 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-16102-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Splash Shield, Front Driver Side Part Number: 8L5Z-16103-A
Product Specifications
- Other Name: Guard - Front Splash; Fender Splash Shield, Front Left; Fender Splash Shield
- Position: Front Driver Side
- Base No.: 16102
- Item Weight: 1.20 Pounds
- Item Dimensions: 9.3 x 29.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L5Z-16103-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2009 Ford Ranger Splash Shield Part Number: F37Z-9928370-A
Product Specifications
- Other Name: Shield - Splash - Wheelhouse
- Base No.: 28370
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F37Z-9928370-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2009 Ford Ranger Wheelhouse

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Ranger Wheelhouse available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Ranger Wheelhouse as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Ranger Wheelhouse Parts Q&A

Q: How to service and repair the front Wheelhouse liner on 2009 Ford Ranger?
A: Service and repair of the front fender liner requires disconnecting the electrical connector locators of the RH front fender splash shield and the vacuum lines of the LH front fender splash shield from their respective storage reservoir. Van.installations must start by removing three scrivets from within the splash shield front then moving on to the lower front splash shield bolts and nuts. Users must remove a bolt with nut from the LH front fender splash shield yet they should detach two bolts from the RH front fender splash shield. The RH front fender splash shield requires removal of its 5 pushpins that connect to the inner splash shield before extracting the inner splash shield. Men must take out the scrivet from the lower rear splash shield followed by removal of the front fender splash shield. The process completion follows the reverse sequence of removal procedures.