How to service and repair the front Wheelhouse liner on Ford Ranger?

Service and repair of the front fender liner requires disconnecting the electrical connector locators of the RH front fender splash shield and the vacuum lines of the LH front fender splash shield from their respective storage reservoir. Van.installations must start by removing three scrivets from within the splash shield front then moving on to the lower front splash shield bolts and nuts. Users must remove a bolt with nut from the LH front fender splash shield yet they should detach two bolts from the RH front fender splash shield. The RH front fender splash shield requires removal of its 5 pushpins that connect to the inner splash shield before extracting the inner splash shield. Men must take out the scrivet from the lower rear splash shield followed by removal of the front fender splash shield. The process completion follows the reverse sequence of removal procedures.

OEM Ford Ranger Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Wheelhouses found

View related parts
Ford Ranger Splash Shield, Front Driver Side Part Number: 1L5Z-16103-CA
$13.78 MSRP: $15.77
You Save: $1.99 (13%)
ADD TO CART
Product Specifications
- Other Name: Shield; Fender Splash Shield, Front Left; Fender Splash Shield
- Manufacturer Note: L.H., New parts are smaller than the OE. There was a design change and new parts are shorter, but will still fit and function the same as the OE parts.
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2006 Ford Ranger | Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Splash Shield, Front Passenger Side Part Number: 7L5Z-16102-A
$14.98 MSRP: $21.25
You Save: $6.27 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield; Fender Splash Shield, Front Right; Fender Splash Shield
- Position: Front Passenger Side
- Replaces: F87Z-16102-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2011 Ford Ranger | Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Rear Shield, Front Driver Side Part Number: KB3Z-16103-A
$9.20 MSRP: $13.05
You Save: $3.85 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Guard - Front Splash
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Mud Shield, Driver Side Part Number: KB3Z-16A550-H
$30.84 MSRP: $35.00
You Save: $4.16 (12%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Mud Shield, Passenger Side Part Number: KB3Z-16A550-G
$30.84 MSRP: $35.00
You Save: $4.16 (12%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Splash Guard, Driver Side Part Number: HB3Z-16A550-B
$30.06 MSRP: $35.00
You Save: $4.94 (15%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Fender Splash Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Splash Guard, Passenger Side Part Number: HB3Z-16A550-A
$30.06 MSRP: $35.00
You Save: $4.94 (15%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Fender Splash Shield
- Position: Passenger Side
- Replaces: KB3Z-16A550-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Fender Liner, Front Driver Side Part Number: KB3Z-16103-F
$80.43 MSRP: $92.66
You Save: $12.23 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Guard - Front Splash; Fender Splash Shield, Front Left; Fender Splash Shield
- Position: Front Driver Side
- Replaces: KB3Z-16103-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Fender Liner, Front Passenger Side Part Number: KB3Z-16102-E
$80.43 MSRP: $92.66
You Save: $12.23 (14%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Guard - Front Splash; Fender Splash Shield, Front Right; Fender Splash Shield
- Position: Front Passenger Side
- Replaces: KB3Z-16102-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Rear Shield, Passenger Side Part Number: KB3Z-16102-A
$22.95 MSRP: $33.40
You Save: $10.45 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Wheelhouse Liner, Rear Driver Side Part Number: KB3Z-9928371-A
$48.17 MSRP: $68.92
You Save: $20.75 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash - Wheelhouse; Quarter Panel Splash Shield, Rear Center Left, Rear Left; Fender Splash Shield
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Inner Trim, Front Center Driver Side Part Number: KB3Z-16103-C
$7.78 MSRP: $11.03
You Save: $3.25 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Guard - Front Splash; Fender Liner Extension, Front Center Left
- Position: Front Center Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Inner Shield, Front Upper Driver Side Part Number: KB3Z-16102-D
$17.21 MSRP: $25.05
You Save: $7.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash; Fender Liner Extension, Front Left Upper
- Position: Front Upper Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Inner Trim, Front Center Passenger Side Part Number: KB3Z-16102-C
$6.39 MSRP: $9.07
You Save: $2.68 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Splash - Wheelhouse; Fender Liner Extension, Front Center Right
- Position: Front Center Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Front Shield, Lower Driver Side Part Number: KB3Z-16055-A
$15.24 MSRP: $22.18
You Save: $6.94 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield - Fender Apron; Fender Liner Extension, Front Left Lower; Fender Splash Shield
- Position: Front Lower Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2023 Ford Ranger | Lariat, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
Ford Ranger Splash Shield, Front Driver Side Part Number: 8L5Z-16103-A
Product Specifications
- Other Name: Guard - Front Splash; Fender Splash Shield, Front Left; Fender Splash Shield
- Position: Front Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Ranger | FX4, Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
Ford Ranger Splash Shield Part Number: F37Z-9928370-A
Product Specifications
- Other Name: Shield - Splash - Wheelhouse
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1993-2011 Ford Ranger | Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

Ford Ranger Wheelhouse

OEM Wheelhouse boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Wheelhouse with long life and a perfect fit. Come to our website and find genuine Ford Ranger parts. We keep a wide inventory of OEM Ranger parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Ranger Wheelhouse stands out as a vital part which ensures both performance excellence and reliability of this Ford Ranger model. The Wheelhouse functions to defend wheel wells against water as well as debris while blocking entry of dirt to ensure protection against rust and corrosion which affects the fender and engine bay. The protection offered by this feature improves both efficiency and safety in Ford Rangers so they function well in rough environmental conditions. The Wheelhouse system has progressed through time as Ford continuously updates its manufacturing techniques from metal to advanced thermoplastic materials which demonstrates their dedication to industrial innovation and material quality improvement. This protective component is suitable for different Ranger models and it provides security for vehicle structures while maintaining attractive designs. Two key traits of a Ford Ranger Wheelhouse are its tightly fitting design and strong engineering which boost vehicle performance during on-road and off-road operations. The Wheelhouse covers the wheels of the vehicle to provide protection from environmental factors thus becoming a signature product for the market. The Ford Ranger Wheelhouse plays an essential role to maintain the automaker model reliability and durability while solidifying its standing as an excellent pickup truck solution for safety-oriented performance-driven drivers.

Ford Ranger Wheelhouse Parts and Q&A

Splash Shield
F37Z-9928370-A
Q: How to service and repair the front Wheelhouse liner on Ford Ranger?
A:
Service and repair of the front fender liner requires disconnecting the electrical connector locators of the RH front fender splash shield and the vacuum lines of the LH front fender splash shield from their respective storage reservoir. Van.installations must start by removing three scrivets from within the splash shield front then moving on to the lower front splash shield bolts and nuts. Users must remove a bolt with nut from the LH front fender splash shield yet they should detach two bolts from the RH front fender splash shield. The RH front fender splash shield requires removal of its 5 pushpins that connect to the inner splash shield before extracting the inner splash shield. Men must take out the scrivet from the lower rear splash shield followed by removal of the front fender splash shield. The process completion follows the reverse sequence of removal procedures.