FordParts
My Garage
My Account
Cart
OEM 2009 Lincoln MKZ Battery Cable
Car Battery Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Battery Cables found
2009 Lincoln MKZ Cable Part Number: 8E5Z-14300-AA
Product Specifications- Other Name: Cable Assembly - Battery Positive; Battery Cables
- Base No.: 14300B
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.3 x 13.7 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8E5Z-14300-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln MKZ Battery Cable Part Number: 7H6Z-14300-AA
Product Specifications- Other Name: Cable Assembly - Battery To Battery; Battery Cables; Positive Cable
- Base No.: 14300A
- Item Weight: 4.50 Pounds
- Item Dimensions: 4.6 x 18.1 x 17.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7H6Z-14300-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Lincoln MKZ Battery Cable
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln MKZ Battery Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln MKZ Battery Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Lincoln MKZ Battery Cable Parts Q&A
- Q: How to service the battery cables for the 3.5L engine on 2009 Lincoln MKZ?A: The first step to work on 3.5L engine battery cables involves taking out the battery tray. The bolt needs removal for the body ground terminal of the battery cable after which you should place both components aside before tightening the bolt to 12 Nm (106 lb-in) during reinstallation. Move the starter solenoid terminal cover off before removing the nut from the terminal while also setting aside the battery cable starter solenoid terminal to be tightened at 12 Nm (106 lb-in) when installing it. The next step involves removing the starter motor solenoid nut followed by setting the wire terminal aside during the installation when tightening to 5 Nm (44 lb-in). Position the battery cable transaxle ground terminal aside by removing the bolt and release the locator from the engine then tighten the bolt to 10Nm (89lb-in) before reinstallation. Remove the battery cable locator from the transaxle stud bolt as well as each battery cable locator from the LH valve cover. Set the generator protective cover to the side before removing the nut from the B+ terminal connection to secure the terminal with 12 Nm (106 lb-in) torque when replacing it. Terminate the installation by first removing the battery cables then performing the removal steps in reverse order.