Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2009 Mercury Mountaineer Submodels:
Premier | 8 Cyl 4.6 L GAS
2009 Mercury Mountaineer Universal Joint
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Mountaineer Universal Joint available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Mountaineer Universal Joint as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Mercury Mountaineer Universal Joint Parts Q&A
Q: How to service and repair the driveshaft universal joint of the snap ring type on 2009 Mercury Mountaineer?
A: Attention to the U-joint indexing is essential during driveshaft removal to perform snap ring universal joint repair of driveshaft components. Insert the driveshaft into the C-Frame of the Screw Installer/Remover to eliminate the four snap rings as well as press out the bearing cup. Apply pliers only when bearing cups prove difficult to press completely out of their position. The drive shaft must be rotated while press pressure is applied to the spider to extract the remaining bearing cup and afterward remove the driveshaft flange. First, put the driveshaft within the C-Frame and Screw Installer/Remover to extract the following bearing cup by using pliers as needed followed by driveshaft rotation to press on the spider. Cleaning the bore holes of the bearing cup follows along with U-joint movement testing. Any binding requires a small impact to the driveshaft flange using a brass or plastic hammer while keeping the U-joints out of the strike path. The assembly process proceeds with an opposite order of steps following disassembly while using the yellow snap rings available in the kit to apply U-joints correctly. The installation of yellow snap rings will achieve the needed results but black snap rings are available for optional usage when facing difficulties.