How to Properly Service and Repair a Tail Pipe and Muffler on Ford Crown Victoria?

In order to service the muffler and tailpipe, the car must be in neutral on a hoist and the air suspension should be disabled. Take off nuts and clamp, and part with an exhaust cutter. Change and re-change isolators. Install again using new fasteners, fit to specifications without lubricants.

How to Service the Muffler and Tail Pipe on Ford Crown Victoria?

To have the muffler and tailpipe serviced, switch off air suspension system. When the vehicle is in neutral on a hoist, strip the vehicle and separate the parts using an exhaust cutter and remove the clamp. Install check and replace insulators. Rebuild using new fasteners, by turning them alternately to specifications.

OEM Ford Crown Victoria Tail Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Tail Pipes found

View related parts
Ford Crown Victoria Front Pipe Part Number: 4W7Z-5246-CA
$224.66 MSRP: $310.80
You Save: $86.14 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe
- Replaces: 3W7Z-5246-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Inlet Pipe Part Number: 4W7Z-5246-BA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Crossover Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Front Pipe
- Replaces: 3W7Z-5246-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Inlet Pipe, Front Part Number: F2AZ5246C
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Front Pipe; Pipe - Exhaust - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Muffler, Rear Passenger Side Part Number: 6W7Z-5230-BA
Product Specifications
- Other Name: Muffler Assembly - Centre And Rear; Exhaust Muffler, Right
- Position: Rear Passenger Side
- Replaces: 4W7Z-5230-DA, 5W7Z-5230-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Inlet Pipe Part Number: 4W7Z-5246-AA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Crossover Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Front Pipe
- Replaces: 3W7Z-5246-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Muffler, Front Passenger Side Part Number: 7W7Z-5230-AA
Product Specifications
- Other Name: Muffler Assembly - Front
- Position: Front Passenger Side
- Replaces: 6W7Z-5230-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Muffler, Front Driver Side Part Number: 6W7Z-5230-A
Product Specifications
- Other Name: Muffler Assembly - Front
- Manufacturer Note: LH muffler with fire protection, FROM 8/3/2005
- Position: Front Driver Side
- Replaces: 5W7Z-5230-FB, 6W7Z-5230-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

Ford Crown Victoria Tail Pipe

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Tail Pipe. We offer an extensive inventory of OEM Ford Crown Victoria Tail Pipe at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Tail Pipe Parts and Q&A

Inlet Pipe
4W7Z-5246-AA
Q: How to Properly Service and Repair a Tail Pipe and Muffler on Ford Crown Victoria?
A: In order to service the muffler and tailpipe, the car must be in neutral on a hoist and the Air Suspension should be disabled. Take off nuts and clamp, and part with an exhaust cutter. Change and re-change isolators. Install again using new fasteners, fit to specifications without lubricants.
Inlet Pipe
4W7Z-5246-BA
Q: How to Service the Muffler and Tail Pipe on Ford Crown Victoria?
A: To have the muffler and tailpipe serviced, switch off Air Suspension system. When the vehicle is in neutral on a hoist, strip the vehicle and separate the parts using an exhaust cutter and remove the clamp. Install check and replace insulators. Rebuild using new fasteners, by turning them alternately to specifications.