How to service and repair the exhaust pipe, specifically the muffler and tailpipe on Ford Crown Victoria?

Turn off the air suspension electrical power before repairing the exhaust pipe because unexpected air spring pressure changes may cause vehicle shifting problems during hoisting, jacking or towing operations. Before starting work on the air springs users must drain the air pressure. Start by removing the right rear wheel with its tire while installing axle support using suitable jack stands or a suitable jack. First eliminate the sway bar links by taking out their two securing nuts before disconnecting the shocks from the axle using another two nuts. The task requires removal of the right-hand lateral arm pivot nut and bolt. Vehicle owners should disconnect the height sensor bracket when their model comes with air suspension. Lower the axle and then detach the inlet pipe-to-muffler clamp through the process of unscrewing both clamp nuts and removing the clamp. Start by eliminating the insulators from the system and then proceed to remove the muffler-to-tailpipe flange bolts while unscrewing the nuts. Lastly detach the insulator to free the muffler and tailpipe. The final step for installation requires reversing the steps used for removal.

OEM Ford Crown Victoria Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Exhaust Pipes found

View related parts
Ford Crown Victoria Front Pipe
Part Number: 4W7Z-5246-CA
$194.54 MSRP: $269.12
You Save: $74.58 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe
- Replaces: 3W7Z-5246-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | Base, LWB, LX, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Muffler, Front Driver Side
Part Number: 6W7Z-5230-BC
Product Specifications
- Other Name: Muffler Assembly - Front; Exhaust Muffler, Left; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Muffler
- Position: Front Driver Side
- Replaces: 4W7Z-5230-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Muffler, Front Passenger Side
Part Number: 6W7Z-5230-BB
Product Specifications
- Other Name: Muffler Assembly - Front; Exhaust Muffler, Right; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Muffler
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Inlet Pipe
Part Number: 4W7Z-5246-BA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Crossover Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Front Pipe
- Replaces: 3W7Z-5246-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Inlet Pipe, Front
Part Number: F5AZ5246B
Product Specifications
- Other Name: Pipe - Exhaust Front; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Front Pipe; Pipe - Exhaust - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-1997 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Inlet Pipe, Front
Part Number: F4AZ5246A
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Front Pipe; Pipe - Exhaust - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1994 Ford Crown Victoria | Base, LX, Police Interceptor, S | 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Inlet Pipe, Front
Part Number: F2AZ5246C
Product Specifications
- Other Name: Pipe - Exhaust Front; Exhaust Pipe; Front Pipe; Pipe - Exhaust - Front
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1992-1994 Ford Crown Victoria | Base, LX, Police Interceptor, S, Touring Sedan | 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Muffler, Front Driver Side
Part Number: 6W7Z-5230-BD
Product Specifications
- Other Name: Muffler Assembly - Front; Exhaust Muffler, Left; Direct-Fit Exhaust; Exhaust System Kit
- Position: Front Driver Side
- Replaces: 4W7Z-5230-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Muffler, Rear Passenger Side
Part Number: 6W7Z-5230-BA
Product Specifications
- Other Name: Muffler Assembly - Centre And Rear; Exhaust Muffler, Right
- Position: Rear Passenger Side
- Replaces: 4W7Z-5230-DA, 5W7Z-5230-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Inlet Pipe
Part Number: 4W7Z-5246-AA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Crossover Pipe; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Front Pipe
- Replaces: 3W7Z-5246-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2011 Ford Crown Victoria | Base, LWB, LX, LX Sport, Police Interceptor, S, Special Edition | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Inlet Pipe
Part Number: 1W7Z-5246-BA
Product Specifications
- Other Name: Pipe - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Front Pipe
- Manufacturer Note: Inlet pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Inlet Pipe
Part Number: F8AZ-5246-AA
Product Specifications
- Other Name: Pipe - Exhaust; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Front Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Crown Victoria | Base, LWB, LX, Police Interceptor, S | 8 Cyl 4.6 L CNG, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Muffler, Front Passenger Side
Part Number: 7W7Z-5230-AA
Product Specifications
- Other Name: Muffler Assembly - Front
- Position: Front Passenger Side
- Replaces: 6W7Z-5230-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
Ford Crown Victoria Muffler, Front Driver Side
Part Number: 6W7Z-5230-A
Product Specifications
- Other Name: Muffler Assembly - Front
- Manufacturer Note: LH muffler with fire protection, FROM 8/3/2005
- Position: Front Driver Side
- Replaces: 5W7Z-5230-FB, 6W7Z-5230-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2011 Ford Crown Victoria | Police Interceptor | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

Ford Crown Victoria Exhaust Pipe

Welcome to our website where you can discover high-quality, genuine Ford Crown Victoria Exhaust Pipe. We offer an extensive inventory of OEM Ford Crown Victoria Exhaust Pipe at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Crown Victoria Exhaust Pipe Parts Questions & Experts Answers

Inlet Pipe
F8AZ-5246-AA
Q: How to service and repair the exhaust pipe, specifically the muffler and tailpipe on Ford Crown Victoria?
A: Turn off the Air Suspension electrical power before repairing the exhaust pipe because unexpected air spring pressure changes may cause vehicle shifting problems during hoisting, jacking or towing operations. Before starting work on the air springs users must drain the air pressure. Start by removing the right rear wheel with its tire while installing axle support using suitable jack stands or a suitable jack. First eliminate the Sway Bar Links by taking out their two securing nuts before disconnecting the shocks from the axle using another two nuts. The task requires removal of the right-hand lateral arm pivot nut and bolt. Vehicle owners should disconnect the height sensor bracket when their model comes with air suspension. Lower the axle and then detach the inlet pipe-to-Muffler clamp through the process of unscrewing both clamp nuts and removing the clamp. Start by eliminating the insulators from the system and then proceed to remove the muffler-to-tailpipe flange bolts while unscrewing the nuts. Lastly detach the insulator to free the muffler and tailpipe. The final step for installation requires reversing the steps used for removal.