How to Determine If the A/C Accumulator Needs Replacement When Servicing the HVAC System on Ford E-150?

The suction accumulator requires replacement only when contamination is present from damaged A/C compressors or physical damage like leaks or moisture damage following a total refrigerant loss along with atmospheric pressure exposure. The first step involves recovering refrigerant before unbolting the battery tray to extract the battery tray and battery assembly. Repeating the bolt torque value to 28 Nm (21 lb-ft) should be done when reinstalling the tray. Take the two bolts off from the washer reservoir filler tube before placing it to the side. You should disconnect the evaporator outlet fitting using a wrench on both sides while disposing of the O-ring seal before installing the new fitting securely at 39 Nm (29 lb-ft). Install the suction accumulator outlet fitting on vehicles without auxiliary A/C while discarding both O-ring seals and gasket seals and tightening it to 15 Nm (11 lb-ft). The suction accumulator outlet spring lock coupling of vehicles with auxiliary A/C requires removal along with the O-ring seals for substitution. The technician should disconnect the A/C cycling switch electrical connector before removing the two suction accumulator bolts which need tightening to 14 Nm (10 lb-ft) when reinstalling. The correct procedure for suction accumulator removal is followed for installation by using new gasket seal and O-ring seals while lubricating the refrigerant system with the required amount of clean PAG oil and performing evacuation then leak testing and refrigerant charging.

OEM Ford E-150 A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 A/C Accumulators found

View related parts
Ford E-150 Drier Part Number: GC2Z-19C836-D
$106.19 MSRP: $174.73
You Save: $68.54 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly - Air Conditioning; A/C Accumulator; Drier Desiccant Element; A/C Receiver Drier; Accumulator
- Replaces: 7C2Z-19C836-C, YF-3350, GC2Z-19C836-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Accumulator Part Number: GC2Z-19C836-C
$109.73 MSRP: $180.55
You Save: $70.82 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly - Air Conditioning; A/C Accumulator; A/C Receiver Drier
- Replaces: 7C2Z-19C836-A, GC2Z-19C836-A, YF-3348
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Dehydrator Part Number: 5C2Z-19C836-AB
$106.96 MSRP: $176.00
You Save: $69.04 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly - Air Conditioning; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator
- Manufacturer Note: Less Pressure Switch
- Replaces: YF-3118, 5C2Z-19C836-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-150 | Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Dehydrator Part Number: 2C2Z-19C836-BB
Product Specifications
- Other Name: Accumulator Assembly - Air Conditioning; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Accumulator; Drier
- Replaces: 2C2Z-19C836-BA, YF-2832
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-150 | Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Drier Part Number: 4C2Z-19C836-AB
Product Specifications
- Other Name: Accumulator Assembly - Air Conditioning; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Accumulator
- Manufacturer Note: Less Pressure Switch
- Replaces: 4C2Z-19C836-AA, YF-2946
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

Ford E-150 A/C Accumulator

OEM A/C Accumulator boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get A/C Accumulator with long life and a perfect fit. Come to our website and find genuine Ford E-150 parts. We keep a wide inventory of OEM E-150 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Some of the premier parts for the Ford E-150 are the Ford E-150 A/C Accumulator, which is essential and highly regarded in the reliability of the company's E-150 fleet. Intended to minimize the humidity levels inside the A/C and collect dirt within the air conditioning system of the car, this component is an important part of the A/C system of a car. This position of the A/C system makes it efficient to work between the evaporator and the compressor minimizing formation of sludge and corrosion that may greatly affect the functionality of the system. This Ford E-150 A/C Accumulator lists a compatible product for different E-150 models making it equally useful for a keeper interested in updating the car's air conditioning part. The A/C Accumulator should also be replaced on a regular basis; this is mandatory after any major services that are conducted on the A/C system the warranty for replacement compressors will be void if this is not done. This aspect also reduces the cases of moisture problems and helps in enhancing the durability of an A/C system. The specialization of the Ford E-150 A/C Accumulator in the automotive market is based on the durability of its construction and effectiveness with regards to preserving the efficiency of the air conditioning system. Now, after years of successful operation, the Ford E-150 A/C Accumulator is one more part that can be considered the premier by car owners who value their car's reliability and performance. Due to this, Ford E-150 owners should ensure that they purchases a quality A/C Accumulator as this enhances the comfort of the car as well as the efficiency of the air conditioning systems.

Ford E-150 A/C Accumulator Parts and Q&A

Accumulator
GC2Z-19C836-C
Q: How to Determine If the A/C Accumulator Needs Replacement When Servicing the HVAC System on Ford E-150?
A:
The suction accumulator requires replacement only when contamination is present from damaged A/C compressors or physical damage like leaks or moisture damage following a total refrigerant loss along with atmospheric pressure exposure. The first step involves recovering refrigerant before unbolting the battery tray to extract the battery tray and battery assembly. Repeating the bolt torque value to 28 Nm (21 lb-ft) should be done when reinstalling the tray. Take the two bolts off from the washer reservoir filler tube before placing it to the side. You should disconnect the evaporator outlet fitting using a wrench on both sides while disposing of the O-ring seal before installing the new fitting securely at 39 Nm (29 lb-ft). Install the suction accumulator outlet fitting on vehicles without auxiliary A/C while discarding both O-ring seals and gasket seals and tightening it to 15 Nm (11 lb-ft). The suction accumulator outlet spring lock coupling of vehicles with auxiliary A/C requires removal along with the O-ring seals for substitution. The technician should disconnect the A/C cycling switch electrical connector before removing the two suction accumulator bolts which need tightening to 14 Nm (10 lb-ft) when reinstalling. The correct procedure for suction accumulator removal is followed for installation by using new gasket seal and O-ring seals while lubricating the refrigerant system with the required amount of clean PAG oil and performing evacuation then leak testing and refrigerant charging.