How to service and repair the ignition coil on Ford E-150 Econoline?

Start servicing and repairing the ignition coil by first removing its electrical connectors such as the ignition coil electrical connector as well as the radio ignition interference capacitor connector. You must first disconnect spark plug wires from the ignition coil while noting their positions to achieve correct future reinstallation. Remember to keep track of the tower-to-cylinder relations during this service procedure. Start by removing the accelerator control snow shield by unscrewing its attaching bolts and gently pulling out the shield from its position. Start by disconnecting the accelerator end cable and then the end cable of the speed control actuator when present before detaching the cables from the bracket. Use tools to remove the accelerator cable bracket when you detach its bolt and nut. You can remove the ignition coil through the procedure of unscrewing the nuts along with the stud bolt. Check the ignition coil for carbon tracks and inspect it for any damage during final inspection. After completing the reverse process, the installation will be complete.

OEM Ford E-150 Econoline Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Ignition Coils found

View related parts
Ford E-150 Econoline Ignition Coil Part Number: F7PZ-12029-AA
$36.98 MSRP: $58.73
You Save: $21.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Coil
- Replaces: F5FZ-12029-A, F32Z-12029-A, F5ZZ-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1990-1996 Ford E-150 Econoline | Base, Custom, XL | 6 Cyl 4.9 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.8 L GAS
View related parts
Ford E-150 Econoline Ignition Coil Part Number: F5SZ-12029-B
$90.50 MSRP: $148.91
You Save: $58.41 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil Oe Quality; Distributor Less Coil; Direct Ignition Coil; Coil Assembly; Coil
- Replaces: F1SZ-12029-A, F5SZ-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2000 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS
View related parts
Ford E-150 Econoline Ignition Coil Part Number: 7U2Z-12029-B
$70.39 MSRP: $115.82
You Save: $45.43 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil Oe Quality; Distributor Less Coil; Direct Ignition Coil; Coil Assembly; Coil
- Replaces: 7U2Z-12029-A, DG-484, F1VY-12029-A, F37Z-12029-A, F5LY-12029-A, F5OY-12029-A, F5OY-12029-B, E8TZ-12029-A, YS4Z-12029-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1999 Ford E-150 Econoline | Base, XL | 8 Cyl 4.6 L GAS
View related parts
Ford E-150 Econoline Ignition Coil Part Number: 5F2Z-12029-AD
$82.65 MSRP: $136.00
You Save: $53.35 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil Oe Quality; Direct Ignition Coil; Coil
- Replaces: 1F2Z-12029-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Ford E-150 Econoline | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-150 Econoline Ignition Coil Part Number: 3W7Z-12029-AA
$48.95 MSRP: $80.55
You Save: $31.60 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Ignition Coil Set; Coil
- Replaces: 1L2Z-12029-AA, 8W7Z-12029-A, DG-540
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford E-150 Econoline | Base, XL | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Econoline Ignition Coil Part Number: F57Z-12029-B
$161.70 MSRP: $220.04
You Save: $58.34 (27%)
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Distributor Less Coil; Coil
- Replaces: F57Z-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997 Ford E-150 Econoline | Base, XL | 6 Cyl 4.2 L GAS

Ford E-150 Econoline Ignition Coil

OEM Ignition Coil boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Ignition Coil with long life and a perfect fit. Come to our website and find genuine Ford E-150 Econoline parts. We keep a wide inventory of OEM E-150 Econoline parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford E-150 Econoline Ignition Coil Parts and Q&A

Ignition Coil
F5SZ-12029-B
Q: How to service and repair the ignition coil on Ford E-150 Econoline?
A:
Start servicing and repairing the ignition coil by first removing its electrical connectors such as the ignition coil electrical connector as well as the radio ignition interference capacitor connector. You must first disconnect spark plug wires from the ignition coil while noting their positions to achieve correct future reinstallation. Remember to keep track of the tower-to-cylinder relations during this service procedure. Start by removing the accelerator control snow shield by unscrewing its attaching bolts and gently pulling out the shield from its position. Start by disconnecting the accelerator end cable and then the end cable of the speed control actuator when present before detaching the cables from the bracket. Use tools to remove the Accelerator Cable bracket when you detach its bolt and nut. You can remove the ignition coil through the procedure of unscrewing the nuts along with the stud bolt. Check the ignition coil for carbon tracks and inspect it for any damage during final inspection. After completing the reverse process, the installation will be complete.