How Should the Vapor Canister Be Serviced to Ensure Safety and Proper Installation on Ford E-150?

The safety protocol for servicing the evaporative emission system requires disconnecting the battery ground cable to protect against vaporous fuel explosive hazards. Keep all open flames and smoking materials at least a safe distance from components that contain fuel in them. The EVAP canister of the midship fuel tank operates in the same manner as the aft-of-axle fuel tank EVAP canister but might employ a vapor hose instead of a vent solenoid. Position your vehicle into neutral while hoisted and take out its spare tire shortly after. Start by disconnecting the fuel vapor vent hose followed by the fuel vapor tube-to-evap canister quick connect coupling and then both the evap canister vent solenoid electrical connector and harness retainer. Install the heat shield bolt by tightening it to 18 Nm (13 lb-ft) at the van/wagon vehicle reinstallation. The next step requires removing lower evap canister and bracket assembly bolts and heat shield bolts which need tightness set to 18 Nm (13 lb-ft) during reinstallation. All vehicles need to remove the evap canister and bracket assembly bolts but van/wagon models already completed this step when taking off lower assembly bolts. The technician must separate the evap canister by disconnecting the evap canister-to-hydrocarbon filter canister tube quick connect coupling while removing it from the bracket. The installation requires application of clean engine oil to O-ring seals followed by the reverse order of disassembly. Leak testing of the evaporative emission system should take place after installation followed by execution of the evaporative emission repair verification drive cycle.

OEM Ford E-150 Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Vapor Canisters found

View related parts
Ford E-150 Vacuum Reservoir Part Number: 4C3Z-9E453-AA
$75.57 MSRP: $110.00
You Save: $34.43 (32%)
ADD TO CART
Product Specifications
- Other Name: Reservoir - Vacuum; Reservoir
- Manufacturer Note: includes check valve at "VAC" port
- Replaces: F7UZ-9E453-LA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Vapor Canister Part Number: BU5Z-9C985-B
$184.35 MSRP: $292.73
You Save: $108.38 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Canister; Cannister - Fuel Vapour Store
- Replaces: 9U5Z-9C985-A, BU5Z-9C985-A, 7L1Z-9C985-C, 7L1Z-9C985-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Vapor Canister Part Number: F75Z-9D653-AC
$164.65 MSRP: $270.91
You Save: $106.26 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-150 | Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford E-150 Vapor Canister Part Number: 9C2Z-9D653-H
$162.29 MSRP: $261.82
You Save: $99.53 (39%)
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Cannister - Fuel Vapour Store
- Replaces: 9C2Z-9D653-F
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Vapor Canister Part Number: BC2Z-9D653-E
$176.80 MSRP: $290.91
You Save: $114.11 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete Assembly
- Replaces: BC2Z-9D653-A, CX-2390
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Vapor Canister Part Number: 6C2Z-9D653-E
$181.22 MSRP: $298.18
You Save: $116.96 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Manufacturer Note: Vapor Canister
- Replaces: 4C2Z-9D653-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Vapor Canister Part Number: 6C2Z-9D653-D
Product Specifications
- Other Name: Reservoir Assembly
- Replaces: 4C2Z-9D653-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-150 | Base, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Vapor Canister Part Number: 2C2Z-9D653-DA
Product Specifications
- Other Name: Cannister - Fuel Vapour Storage; Vapor Canister Purge Solenoid; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete canister asy.,
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2007 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

Ford E-150 Vapor Canister

OEM Vapor Canister boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Vapor Canister with long life and a perfect fit. Come to our website and find genuine Ford E-150 parts. We keep a wide inventory of OEM E-150 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

A Ford E-150 Vapor Canister is a notorious part of the EVAP system which is most acclaimed for its stability and effectiveness throughout the diverse models of E-150 car. Meant to keep hydrocarbon from getting into the atmosphere, the Vapor Canister stores fuel vapors from the fuel tank for use in the engin when needed, to burn efficiently. Apart from increasing the effectiveness of the Ford E-150, this functionality also occupies a critical position in the protection of the environment. The Vapor Canister usually has activated charcoal which effectively adsorbs considerable amounts of fuel vapors, and may also possess replaceable filter for ease of usage. Thanks to the latest in today's OBD II mechanisms, the Ford E-150 Vapor Canister comes equipped with other components - Canister Vent Solenoid and Fuel Tank Pressure Sensor - that much enhance the processes on emissions management. This evolution establishes why the Ford E-150 is the company's response to commercial vehicles performance and efficiency with regard to sustainable living. The ability of the Vapor Canister to work well with different E-150 models also puts its credibility in the automotive industry as excellent, thus making the Vapor Canister one of the best to work with, particularly for people who want nothing but the best. All in all, the Ford E-150 Vapor Canister perfectly represents the company's focus on the improvement of the car's performance and, at the same time, environmental compliance, which makes of it an essential asset for any Ford E-150 driver.

Ford E-150 Vapor Canister Parts and Q&A

Vapor Canister
6C2Z-9D653-E
Q: How Should the Vapor Canister Be Serviced to Ensure Safety and Proper Installation on Ford E-150?
A:
The safety protocol for servicing the evaporative emission system requires disconnecting the battery ground cable to protect against vaporous fuel explosive hazards. Keep all open flames and smoking materials at least a safe distance from components that contain fuel in them. The EVAP canister of the midship fuel tank operates in the same manner as the aft-of-axle fuel tank EVAP canister but might employ a vapor hose instead of a vent solenoid. Position your vehicle into neutral while hoisted and take out its spare tire shortly after. Start by disconnecting the fuel vapor vent hose followed by the fuel vapor tube-to-evap canister quick connect coupling and then both the evap canister vent solenoid electrical connector and harness retainer. Install the heat shield bolt by tightening it to 18 Nm (13 lb-ft) at the van/wagon vehicle reinstallation. The next step requires removing lower evap canister and bracket assembly bolts and heat shield bolts which need tightness set to 18 Nm (13 lb-ft) during reinstallation. All vehicles need to remove the evap canister and bracket assembly bolts but van/wagon models already completed this step when taking off lower assembly bolts. The technician must separate the evap canister by disconnecting the evap canister-to-hydrocarbon filter canister tube quick connect coupling while removing it from the bracket. The installation requires application of clean engine oil to O-ring seals followed by the reverse order of disassembly. Leak testing of the evaporative emission system should take place after installation followed by execution of the evaporative emission repair verification drive cycle.