How to service and repair the muffler and tailpipe assembly on Ford E-150?

First start by putting the vehicle in neutral position and hoisting it on a rack while supporting the assembly with safety stands. First release all hanger isolators and follow by loosening the muffler Torca(R) clamp then tighten it to 55 Nm (41 lb-ft) strength during reinstallation. Vehicle owners must first loose the extension clamp using Torca(R) mechanism followed by removal of the extension before reinstallation where they need to tighten the clamp to 55 Nm (41 lb-ft). First loosen and then remove the RH rear upper shock absorber nut from the assembly before torqueing it to 40 Nm (30 lb-ft) during reinstallation then proceed to remove the RH rear lower shock absorber nut and shock absorber which requires tightening to 80 Nm (59 lb-ft) when reinstalling both components. Motor vans and wagons need the muffler and tailpipe assembly disconnected from the exhaust intermediate pipe while stripped chassis require removing it from the catalytic converter extension pipe. The complete muffler should be taken out from the vehicle along with the tailpipe assembly before reinstallation while using the same orientation for any new Torca(R) clamp as the original setup.

OEM Ford E-150 Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Mufflers found

View related parts
Ford E-150 Muffler & Pipe, Front Part Number: 9C2Z-5230-C
$975.98 MSRP: $1387.31
You Save: $411.33 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L FLEX
View related parts
Ford E-150 Muffler, Rear Part Number: F7UZ-5230-AA
$37.84 MSRP: $52.34
You Save: $14.50 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Manufacturer Note: Muffler asy. - 4.2L - 124" WB - Stripped Chassis
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-150 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-150 Muffler & Pipe, Front Part Number: 9C2Z-5230-B
$1032.08 MSRP: $1369.25
You Save: $337.17 (25%)
ADD TO CART
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-150 | Base, XL, XLT | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-150 Muffler, Rear Part Number: YC2Z-5230-FA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-150 | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Muffler, Rear Part Number: YC2Z-5230-CA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler
- Manufacturer Note: Muffler - E350 - stripped chassis & cutaway - 2000/2003 - BEFORE 11-14-02
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-150 | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Muffler, Rear Part Number: YC2Z-5230-AA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Manufacturer Note: Muffler asy. - 4.6L - 2000/2003
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-150 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-150 Muffler, Rear Part Number: F7UZ-5230-HD
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Manufacturer Note: Muffler asy. - 4.2L - E150/250 - for vehicles built before 1999 also use XC2Z-5G209-AA damper - 1997/
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-150 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-150 Muffler, Front Part Number: 6C2Z-5230-A
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Position: Front
- Replaces: 6C2Z-5230-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Muffler, Rear Part Number: 4C2Z-5230-NA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler
- Manufacturer Note: Muffler asy. - exc. 124" WB Stripped Chassis - BEFORE 4/19/04
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford E-150 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-150 Muffler & Pipe, Rear Part Number: 7C2Z-5230-HA
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-150 | Base, XL, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford E-150 Muffler & Pipe, Rear Part Number: 7C2Z-5230-B
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-150 | Base, XL, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford E-150 Muffler, Rear Part Number: 6C2Z-5230-NE
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe
- Position: Rear
- Replaces: 6C2Z-5230-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford E-150 Muffler, Rear Part Number: 6C2Z-5230-NA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Muffler And Pipe Assembly - Rear
- Manufacturer Note: Muffler asy. - exc. 124" WB Stripped Chassis - FROM 4/18/05 to 6/20/2005
- Position: Rear
- Replaces: 4C2Z-5230-NB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford E-150 Muffler, Rear Part Number: 6C2Z-5230-HC
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Muffler And Pipe Assembly - Rear
- Position: Rear
- Replaces: 6C2Z-5230-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford E-150 | Base, Chateau, XL, XLT | 8 Cyl 5.4 L GAS

Ford E-150 Muffler

OEM Muffler boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Muffler with long life and a perfect fit. Come to our website and find genuine Ford E-150 parts. We keep a wide inventory of OEM E-150 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

That muffler is specific to the Ford, E-150, and is designed for increased efficiency and a signed increase in safety across the model range. Meant to competently channel out the exhaust gase s fume from getting into the cabin, the Muffler of the Ford E-150 gives occupants safety plus takes care of the loud engine sound. While being made out of non-reusable steel, this Ford Muffler uses a complex network of passages and chambers where destructive interference reduces the sound pressure, and thus, fulfils the noise and emissions requirements. This automotive vehicle has gone through diverse changes since its production started in 1957, and this show that Muffler is compatible with models of Ford E-150. Made of stainless steel and aluminized steel, the Ford E-150 Muffler section plays a great role in optimizing the exhaust gases and the overall performance of the car also. For those willing to find performance-oriented settings, there are external options which adjust the sound profile of their headphones while the noise-cancellation and safety options are remaining the essentials. Without a doubt, the Ford E-150 Muffler is among the most outstanding car parts in the current market because it combines functionality as well as durability for every trip. Being one of the oldest brands in the market, it is considered to be very effective and reliable to use the Ford E-150 Muffler in your vehicle.

Ford E-150 Muffler Parts and Q&A

Muffler & Pipe, Rear
7C2Z-5230-HA
Q: How to service and repair the muffler and tailpipe assembly on Ford E-150?
A:
First start by putting the vehicle in neutral position and hoisting it on a rack while supporting the assembly with safety stands. First release all hanger isolators and follow by loosening the muffler Torca(R) clamp then tighten it to 55 Nm (41 lb-ft) strength during reinstallation. Vehicle owners must first loose the extension clamp using Torca(R) mechanism followed by removal of the extension before reinstallation where they need to tighten the clamp to 55 Nm (41 lb-ft). First loosen and then remove the RH rear upper Shock Absorber nut from the assembly before torqueing it to 40 Nm (30 lb-ft) during reinstallation then proceed to remove the RH rear lower shock absorber nut and shock absorber which requires tightening to 80 Nm (59 lb-ft) when reinstalling both components. Motor vans and wagons need the muffler and tailpipe assembly disconnected from the exhaust intermediate pipe while stripped chassis require removing it from the Catalytic Converter extension pipe. The complete muffler should be taken out from the vehicle along with the tailpipe assembly before reinstallation while using the same orientation for any new Torca(R) clamp as the original setup.