How to service the muffler and tailpipe assembly on a 4.6L engine on Ford E-250?

When servicing the muffler and tailpipe assembly of a 4.6L engine it is essential to wait until the exhaust system cools down properly to prevent injuries since the catalytic converter reaches hazardous temperatures rapidly. Using oil or grease based lubricants should be avoided on isolators because they cause rubber deterioration which leads to possible separation of the exhaust hanger bracket. Put the vehicle in neutral mode at the same time set it up on a hoist. A safety stand should hold the muffler and tailpipe assembly after which you can remove all hanger isolators. After loosening the Torca clamp nut on the muffler you should reduce tension but ensure proper torque of 40 Nm when reattaching. Begin by disassembling the muffler and tailpipe from the catalytic converter and then proceed with removing all operational parts from the assembly. Follow the same steps that were used for removal to properly install the exhaust system components.

OEM Ford E-250 Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Mufflers found

View related parts
Ford E-250 Muffler & Pipe, Front Part Number: 9C2Z-5230-C
$975.98 MSRP: $1387.31
You Save: $411.33 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-250 | Base | 8 Cyl 4.6 L FLEX
View related parts
Ford E-250 Muffler, Rear Part Number: F7UZ-5230-AA
$37.84 MSRP: $52.34
You Save: $14.50 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Manufacturer Note: Muffler asy. - 4.2L - 124" WB - Stripped Chassis
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Muffler & Pipe, Front Part Number: 9C2Z-5230-B
$1032.08 MSRP: $1369.25
You Save: $337.17 (25%)
ADD TO CART
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2014 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Muffler, Rear Part Number: YC2Z-5230-FA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Muffler, Rear Part Number: YC2Z-5230-CA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler
- Manufacturer Note: Muffler - E350 - stripped chassis & cutaway - 2000/2003 - BEFORE 11-14-02
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Muffler, Rear Part Number: YC2Z-5230-AA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Manufacturer Note: Muffler asy. - 4.6L - 2000/2003
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Muffler, Rear Part Number: F7UZ-5230-HD
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Manufacturer Note: Muffler asy. - 4.2L - E150/250 - for vehicles built before 1999 also use XC2Z-5G209-AA damper - 1997/
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Muffler, Front Part Number: 6C2Z-5230-A
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit
- Position: Front
- Replaces: 6C2Z-5230-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-250 | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Muffler, Rear Part Number: 4C2Z-5230-NA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler
- Manufacturer Note: Muffler asy. - exc. 124" WB Stripped Chassis - BEFORE 4/19/04
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Muffler & Pipe, Rear Part Number: 7C2Z-5230-HA
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-250 | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Muffler & Pipe, Rear Part Number: 7C2Z-5230-B
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Exhaust Pipe; Muffler
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Muffler, Rear Part Number: 6C2Z-5230-NE
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe
- Position: Rear
- Replaces: 6C2Z-5230-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2006-2007 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Muffler, Rear Part Number: 6C2Z-5230-NA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Muffler And Pipe Assembly - Rear
- Manufacturer Note: Muffler asy. - exc. 124" WB Stripped Chassis - FROM 4/18/05 to 6/20/2005
- Position: Rear
- Replaces: 4C2Z-5230-NB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Muffler, Rear Part Number: 6C2Z-5230-HC
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Muffler And Pipe Assembly - Rear
- Position: Rear
- Replaces: 6C2Z-5230-HA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

Ford E-250 Muffler

OEM Muffler boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Muffler with long life and a perfect fit. Come to our website and find genuine Ford E-250 parts. We keep a wide inventory of OEM E-250 parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Car Mufflers are or are known to play essential roles in the functionality of vehicles, the Ford E-250 Muffler included to be precise about it. Designed to efficiently dampen engine noise, as well as channel out exhaust fumes away from the occupants, the E-250 Muffler protects occupants from dangerous emissions such as Carbon Monoxide, amongst others. It boasts a number of passages and chambers in its design that involves acoustic quieting in order to reduce sound pressure; it has been found to be one-of-its-kind in the automotive industry. The Ford E-250 Muffler is offered in different types and compatibility for the different models of E-250s, and is made of resistant materials such as stainless steel or aluminized steel depending on the type of muffler, either for direct fit, or universal applications. This reflect the flexibility that improves the functionality of the E-250 not forgetting the importance of the regulations that must be met on noise and emissions concluding the importance of powertrain. Moreover, performance mufflers are available for customers who want to enhance the exhaust flow and noise; however, it reduces back pressure which infringes with the engine efficiency. The Ford E-250 Muffler is much more than an acoustic object; it is expected to serve as one of the more important components of the Ford E-250 to maintain the standards and fulfill the expectations of the consumers in order to provide a comfortable and safe drive. All these qualities are in each Ford E-250 Muffler making it an essential addition to the ford lineup in regard to its durability, performance and safety.

Ford E-250 Muffler Parts and Q&A

Muffler, Rear
6C2Z-5230-NA
Q: How to service the muffler and tailpipe assembly on a 4.6L engine on Ford E-250?
A:
When servicing the muffler and tailpipe assembly of a 4.6L engine it is essential to wait until the exhaust system cools down properly to prevent injuries since the Catalytic Converter reaches hazardous temperatures rapidly. Using oil or grease based lubricants should be avoided on isolators because they cause rubber deterioration which leads to possible separation of the exhaust hanger bracket. Put the vehicle in neutral mode at the same time set it up on a hoist. A safety stand should hold the muffler and tailpipe assembly after which you can remove all hanger isolators. After loosening the Torca clamp nut on the muffler you should reduce tension but ensure proper torque of 40 Nm when reattaching. Begin by disassembling the muffler and tailpipe from the catalytic converter and then proceed with removing all operational parts from the assembly. Follow the same steps that were used for removal to properly install the exhaust system components.