How to service and repair the catalytic converter on a stripped chassis on Ford E-250?

You should begin work on catalytic converter service and repair of an empty chassis by putting the vehicle into NEUTRAL position while hanging it from the hoist. Secure the muffler and tailpipe setup with a safety stand before removing the front muffler and tailpipe assembly and all extension pipe hanger isolators that might be installed. Unfasten the muffler and tailpipe assembly and the extension pipe-to-catalytic converter Torca® clamp but proceed to torque both components to 55 Nm (41 lb-ft) when reinstalling. First uninstall the muffler and tailpipe from the vehicle along with the extension pipe if it is part of the catalytic converter. First disconnect the CMS electrical connector followed by removing the exhaust Y-pipe-to-catalytic converter nuts then disposing them before extracting the exhaust Y-pipe-to-catalytic converter support bracket. User must install new nuts by reaching a torque value of 40 Nm (30 lb-ft). Take out the catalytic converter from the exhaust Y-pipe and keep its gasket for disposal. Completion of this task begins with reversing the disassembly steps while making certain to correctly install any needed Torca® clamps.

OEM Ford E-250 Catalytic Converter

Cat. Converter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

22 Catalytic Converters found

View related parts
Ford E-250 Catalytic Converter
Part Number: AC2Z-5F250-A
$1365.00 MSRP: $1842.86
You Save: $477.86 (26%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2014 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Catalytic Converter
Part Number: 7C2Z-5F250-B
$3902.85 MSRP: $5295.71
You Save: $1392.86 (27%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Replaces: 7C2Z-5F250-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Catalytic Converter
Part Number: 9C2Z-5F250-D
$1412.25 MSRP: $1780.00
You Save: $367.75 (21%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Replaces: 9C2Z-5F250-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2010 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L LPG
View related parts
Ford E-250 Catalytic Converter
Part Number: 1C2Z-5E212-CA
Product Specifications
- Other Name: Converter Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Catalytic Converter
Part Number: 5C2Z-5F250-A
$3302.25 MSRP: $4180.00
You Save: $877.75 (21%)
Product Specifications
- Other Name: Converter Assembly
- Replaces: 5C2Z-5F250-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-250 | Base | 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Catalytic Converter, Passenger Side
Part Number: 1C2Z-5E212-BA
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Right; Converter
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Catalytic Converter, Driver Side
Part Number: 1C2Z-5E212-BB
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Left; Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Front Pipe
Part Number: 1C2Z-5F250-BA
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter; Exhaust Pipe
- Position: Front
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Catalytic Converter
Part Number: 3C2Z-5E212-DA
Product Specifications
- Other Name: Converter Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Catalytic Converter
Part Number: 3C2Z-5E212-EA
Product Specifications
- Other Name: Converter Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Catalytic Converter
Part Number: 3C2Z-5E212-FA
Product Specifications
- Other Name: Converter Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Catalytic Converter
Part Number: 4C2Z-5E212-FA
Product Specifications
- Other Name: Converter Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Catalytic Converter
Part Number: 4C2Z-5E212-GA
Product Specifications
- Other Name: Converter Assembly; Converter
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2007 Ford E-250 | Base | 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS
View related parts
Ford E-250 Catalytic Converter, Passenger Side
Part Number: 6C2Z-5E212-AA
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Right; Converter
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Catalytic Converter, Driver Side
Part Number: 6C2Z-5E212-AB
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Left; Converter
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Catalytic Converter
Part Number: 8C2Z-5F250-A
Product Specifications
- Other Name: Converter Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford E-250 | Base | 8 Cyl 4.6 L GAS
View related parts
Ford E-250 Catalytic Converter, Passenger Side
Part Number: XC2Z-5E212-BA
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Right; Converter
- Manufacturer Note: Converter - RH - 4.2L - California - 1999/
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Catalytic Converter, Driver Side
Part Number: XC2Z-5E212-BB
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Left; Converter
- Manufacturer Note: Converter - LH - 4.2L - California - 1999/
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Catalytic Converter, Driver Side
Part Number: YC2Z-5E212-CB
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Left; Converter
- Manufacturer Note: Converter - LH - 4.2L - exc. Calif. - 2000/
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS
View related parts
Ford E-250 Catalytic Converter, Passenger Side
Part Number: YC2Z-5E212-RA
Product Specifications
- Other Name: Converter Assembly; Catalytic Converter, Right; Converter
- Manufacturer Note: Converter - RH - 4.2L - exc. Calif. - 2000/
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford E-250 | Base | 6 Cyl 4.2 L GAS

| Page 1 of 2 |Next >

1-20 of 22 Results

Ford E-250 Catalytic Converter

Welcome to our website where you can discover high-quality, genuine Ford E-250 Catalytic Converter. We offer an extensive inventory of OEM Ford E-250 Catalytic Converter at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford E-250 Catalytic Converter Parts Questions & Experts Answers

Catalytic Converter
9C2Z-5F250-D
Q: How to service and repair the catalytic converter on a stripped chassis on Ford E-250?
A: You should begin work on catalytic converter service and repair of an empty chassis by putting the vehicle into NEUTRAL position while hanging it from the hoist. Secure the Muffler and tailpipe setup with a safety stand before removing the front muffler and tailpipe assembly and all extension pipe hanger isolators that might be installed. Unfasten the muffler and tailpipe assembly and the extension pipe-to-catalytic converter Torca® clamp but proceed to torque both components to 55 Nm (41 lb-ft) when reinstalling. First uninstall the muffler and tailpipe from the vehicle along with the extension pipe if it is part of the catalytic converter. First disconnect the CMS electrical connector followed by removing the exhaust Y-pipe-to-catalytic converter nuts then disposing them before extracting the exhaust Y-pipe-to-catalytic converter support bracket. User must install new nuts by reaching a torque value of 40 Nm (30 lb-ft). Take out the catalytic converter from the exhaust Y-pipe and keep its gasket for disposal. Completion of this task begins with reversing the disassembly steps while making certain to correctly install any needed Torca® clamps.