How to service and repair the brake vacuum pump on Ford E-250?

The first step when repairing the brake vacuum pump requires removal of the accessory drive belt. Cut off power to the vacuum pump by releasing both clamp mechanisms and vacuum hose. A short socket combined with an extension allow people to reach the bolt which is behind the pulley. Remove the three securing bolts from the vacuum pump and proceed to uninstall it. The bolt tightening torque should be set to 47 Nm (35 lb-ft) and the same installation order should be used to finish the work.

OEM Ford E-250 Vacuum Pump

Vacuum Pressure Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Vacuum Pump found

View related parts
Ford E-250 Vacuum Pump
Part Number: AC2Z-2A451-A
Product Specifications
- Other Name: Pump Assembly - Vacuum; Power Brake Booster Vacuum Pump
- Replaces: 4C2Z-2A451-AA, BRPV-1
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

Ford E-250 Vacuum Pump

Welcome to our website where you can discover high-quality, genuine Ford E-250 Vacuum Pump. We offer an extensive inventory of OEM Ford E-250 Vacuum Pump at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford E-250 Vacuum Pump Parts Questions & Experts Answers

Vacuum Pump
AC2Z-2A451-A
Q: How to service and repair the brake vacuum pump on Ford E-250?
A: The first step when repairing the brake vacuum pump requires removal of the accessory Drive Belt. Cut off power to the vacuum pump by releasing both clamp mechanisms and vacuum hose. A short socket combined with an extension allow people to reach the bolt which is behind the pulley. Remove the three securing bolts from the vacuum pump and proceed to uninstall it. The bolt tightening torque should be set to 47 Nm (35 lb-ft) and the same installation order should be used to finish the work.