How to Service the Yaw Sensor on Ford E-250?

The first step to work on the yaw rate sensor requires you to disconnect the electrical connector of the stability control sensor cluster. The installation of stability control sensor cluster requires you to tighten the two bolts to 6 Nm (53 lb-in) after reinstallation. The sensor cluster removal should be followed by performing the installation steps in reverse order. The ABS module demands calibration through instructions accessed from the scan tool.

OEM Ford E-250 Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
Ford E-250 Yaw Rate Sensor
Part Number: 7C2Z-3C187-A
Product Specifications
- Other Name: Sensor Assembly; Suspension Yaw Sensor; Sensor
- Manufacturer Note: Sensor - Yaw
- Replaces: 6C2Z-3C187-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford E-250 | Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

Ford E-250 Yaw Sensor

Welcome to our website where you can discover high-quality, genuine Ford E-250 Yaw Sensor. We offer an extensive inventory of OEM Ford E-250 Yaw Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford E-250 Yaw Sensor Parts Questions & Experts Answers

Yaw Rate Sensor
7C2Z-3C187-A
Q: How to Service the Yaw Sensor on Ford E-250?
A: The first step to work on the yaw rate sensor requires you to disconnect the electrical connector of the stability control sensor cluster. The installation of stability control sensor cluster requires you to tighten the two bolts to 6 Nm (53 lb-in) after reinstallation. The sensor cluster removal should be followed by performing the installation steps in reverse order. The ABS module demands calibration through instructions accessed from the scan tool.