What safety precautions should be observed when servicing the fuel gauge sender and fuel pump module on Ford Escape?

Following the rules of safety is critical during maintenance on the fuel gauge sender and fuel pump module because they contain dangerous fuel mixtures. The first step involves managing fuel system pressure and then separating the battery grounding cable. Clean all surfaces of the module connections and couplings and the flange while you remove the fuel pump module access cover. Place absorbent towels around the space to catch fuel drips before unfastening the quick disconnect coupling between the fuel tube and the fuel pump module and the quick disconnect coupling of the recirculation tube linking the fuel tank filler with the module. Start by attaching a fuel storage tanker through the fuel pump module recirculation tube port on the fuel tank filler pipe to drain approximately one-fourth of fuel which will lower the fuel level under the pump module mounting flange. The Fuel Tank Sender Unit Wrench should be used to take out the lock ring with caution to avoid damaging the fuel pump module. The technician should drain excess fuel into a proper container then fully remove the fuel pump module from the fuel tank. Check the fuel pump module flange where it contacts the fuel tank O-ring seal surfaces; replacement of the module or tank becomes necessary when damage is identified. Workers should apply engine oil to a fresh O-ring seal before they dispose of the old O-ring and properly install the new O-ring together with its lock ring. The assembly ends by reversing removal steps while ensuring the alignment markers face each other between the fuel pump module and fuel tank then tightening the lock ring until it rests on the stop tabs on the fuel tank.

OEM Ford Escape Fuel Pump

Gas Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

28 Fuel Pumps found

View related parts
Ford Escape Fuel Pump Part Number: 9M6Z-9H307-C
$262.19 MSRP: $420.00
You Save: $157.81 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly; Fuel Pump Assembly
- Replaces: 9M6Z-9H307-A, 9M6Z-9H307-B, PFS-477
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Escape | Hybrid, Limited Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Escape Fuel Pump Part Number: AM6Z-9H307-A
$246.30 MSRP: $394.55
You Save: $148.25 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Fuel Pump and Sender Assembly; Fuel Pump Module Assembly; Electric Fuel Pump; Fuel Pump Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Escape | Hybrid, Limited Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Escape Fuel Pump Part Number: BM5Z-9350-A
$270.13 MSRP: $396.67
You Save: $126.54 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Fuel; Direct Injection High Pressure Fuel Pump; Fuel Pump Cut-Off Switch; Gasoline Injector Pump.
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Escape | SE, SEL, Titanium | 4 Cyl 1.6 L GAS
View related parts
Ford Escape Fuel Pump Part Number: AG9Z-9350-B
$352.99 MSRP: $518.33
You Save: $165.34 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Fuel; Direct Injection High Pressure Fuel Pump; Direct Injection Fuel Pump; Mechanical Fuel Pump
- Replaces: AG9Z-9350-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford Escape | SE, SEL, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Escape Fuel Pump Part Number: YL8Z-9H307-AH
$217.21 MSRP: $369.09
You Save: $151.88 (42%)
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly; Fuel Pump Assembly
- Replaces: PFS-399, YL8Z-9H307-AG
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Escape | Limited, XLS, XLT | 4 Cyl 2.0 L GAS
View related parts
Ford Escape Fuel Pump Part Number: AL8Z-9H307-C
$261.71 MSRP: $434.55
You Save: $172.84 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly; Fuel Pump Assembly
- Replaces: AL8Z-9H307-B, PFS-533
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2012 Ford Escape | Limited, XLS, XLT | 4 Cyl 2.5 L GAS
View related parts
Ford Escape Fuel Pump Part Number: YL8Z-9H307-A
$226.84 MSRP: $385.45
You Save: $158.61 (42%)
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly; Fuel Pump Assembly
- Replaces: PFS-295, YL8Z-9H307-BC, YL8Z-9H307-BF, PFS-394
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford Escape | Limited, XLS, XLT | 6 Cyl 3.0 L GAS
View related parts
Ford Escape Fuel Pump Part Number: GV6Z-9H307-D
$260.61 MSRP: $432.73
You Save: $172.12 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump Module Assembly; Fuel Pump Assembly
- Replaces: PFS-1109, GV6Z-9H307-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford Escape | SE, SEL, Titanium | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
Ford Escape Fuel Pump Part Number: 8L8Z-9H307-J
$304.18 MSRP: $487.27
You Save: $183.09 (38%)
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump and Strainer Set; Fuel Pump Module Assembly; Fuel Pump Assembly
- Replaces: 8L8Z-9H307-C, PFS-468, 8L8Z-9H307-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Escape | Limited, XLS, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Fuel Pump Part Number: LX6Z-9H307-C
$569.25 MSRP: $920.00
You Save: $350.75 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Fuel Pump and Sender Assembly; Fuel Pump Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Escape | SE Sport Hybrid, SEL Hybrid, ST-Line Select Hybrid, Titanium Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Escape Fuel Pump Part Number: 8M6Z-9H307-D
$352.99 MSRP: $565.45
You Save: $212.46 (38%)
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Fuel Pump and Sender Assembly; Electric Fuel Pump; Fuel Pump and Strainer Set; Fuel Pump Assembly
- Replaces: 8M6Z-9H307-A, PFS-408, 8M6Z-9H307-B, PFS-512, PFS-513, 8M6Z-9H307-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Escape | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Escape Fuel Pump Part Number: LX6Z-9H307-D
$569.25 MSRP: $920.00
You Save: $350.75 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly; Fuel Pump and Sender Assembly; Fuel Pump Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Escape | Platinum Hybrid, Plug-In Hybrid, SE Plug-In Hybrid, SEL Plug-In Hybrid, ST-Line Elite Hybrid, ST-Line Hybrid, ST-Line Select Hybrid, Titanium Plug-In Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Fuel Gauge Sending Unit Part Number: LX6Z-9A299-B
$67.21 MSRP: $106.73
You Save: $39.52 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Level Sensor; Fuel Sending Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | SE Sport Hybrid, Titanium Hybrid | 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Escape Fuel Gauge Sending Unit Part Number: LX6Z-9A299-C
$67.78 MSRP: $107.64
You Save: $39.86 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2021-2023 Ford Escape | Plug-In Hybrid, SE Plug-In Hybrid, SEL Plug-In Hybrid, Titanium Plug-In Hybrid | 4 Cyl 2.5 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Ford Escape Fuel Gauge Sending Unit Part Number: LX6Z-9A299-A
$13.16 MSRP: $20.36
You Save: $7.20 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender Assembly - Fuel Tank; Fuel Level Sensor; Fuel Sending Unit
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Escape | S, SE, SEL, Titanium | 3 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
Ford Escape Fuel Pump Assembly Part Number: 7M6Z-9H307-C
$426.09 MSRP: $803.64
You Save: $377.55 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sender And Pump Assembly
- Replaces: 5M6Z-9H307-A, PFS-351, PFS-611, 7M6Z-9H307-A, 7M6Z-9H307-B, 6M6Z-9H307-AA, PFS-405, 5M6Z-9H307-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Escape | Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Escape Fuel Pump Part Number: HX7Z-9350-B
$122.52 MSRP: $178.33
You Save: $55.81 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Fuel
- Replaced by: HX7Z-9350-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | S, SE, SEL | 3 Cyl 1.5 L GAS
View related parts
Ford Escape Fuel Pump Part Number: K2GZ-9350-A
$227.00 MSRP: $333.33
You Save: $106.33 (32%)
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Fuel; Direct Injection High Pressure Fuel Pump
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford Escape | SEL, Titanium | 4 Cyl 2.0 L GAS
View related parts
Ford Escape Fuel Pump Part Number: 8L8Z-9H307-H
$249.70 MSRP: $400.00
You Save: $150.30 (38%)
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump and Strainer Set; Fuel Pump Module Assembly; Fuel Pump Assembly
- Replaces: 8L8Z-9H307-F, 8L8Z-9H307-G, PFS-478
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford Escape | Limited, XLS, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Escape Fuel Pump Part Number: 7L8Z-9H307-D
Product Specifications
- Other Name: Sender And Pump Assembly; Electric Fuel Pump; Fuel Pump and Strainer Set; Fuel Pump Module Assembly; Fuel Pump Assembly
- Replaces: 5L8Z-9H307-CC, 5L8Z-9H307-B, 7L8Z-9H307-C, PFS-350, 6L8Z-9H307-CA, PFS-404
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Escape | Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 28 Results

Ford Escape Fuel Pump

OEM Fuel Pump boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Pump with long life and a perfect fit. Come to our website and find genuine Ford Escape parts. We keep a wide inventory of OEM Escape parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Escape Fuel Pump is very vital since it supplies fuel to the engine, thus, leads to maximum combustion. It delivers fuel from the tank to the carburetor or fuel injection system and electric pumps are frequently used in systems of fuel injection. Pumping systems whose operation is determined by a shaft's movement force gasoline into carburetors. Performance fuel pumps come with a flow rated in GPH or LPH and come in different models based on horsepower requirements. The most traditional pumps have been the engine mounted mechanical pumps but they have been replaced with electrical types and high pressures and great efficiency is provided by them which use pulse width modulation for longer durability and less power consumption.

Ford Escape Fuel Pump Parts and Q&A

Fuel Pump
9M6Z-9H307-C
Q: What safety precautions should be observed when servicing the fuel gauge sender and fuel pump module on Ford Escape?
A:
Following the rules of safety is critical during maintenance on the fuel gauge sender and fuel pump module because they contain dangerous fuel mixtures. The first step involves managing fuel system pressure and then separating the battery grounding cable. Clean all surfaces of the module connections and couplings and the flange while you remove the fuel pump module access cover. Place absorbent towels around the space to catch fuel drips before unfastening the quick disconnect coupling between the fuel tube and the fuel pump module and the quick disconnect coupling of the recirculation tube linking the fuel tank filler with the module. Start by attaching a fuel storage tanker through the fuel pump module recirculation tube port on the fuel tank filler pipe to drain approximately one-fourth of fuel which will lower the fuel level under the pump module mounting flange. The Fuel Tank Sender Unit Wrench should be used to take out the lock ring with caution to avoid damaging the fuel pump module. The technician should drain excess fuel into a proper container then fully remove the fuel pump module from the fuel tank. Check the fuel pump module flange where it contacts the fuel tank O-ring seal surfaces; replacement of the module or tank becomes necessary when damage is identified. Workers should apply engine oil to a fresh O-ring seal before they dispose of the old O-ring and properly install the new O-ring together with its lock ring. The assembly ends by reversing removal steps while ensuring the alignment markers face each other between the fuel pump module and fuel tank then tightening the lock ring until it rests on the stop tabs on the fuel tank.