The remote keyless entry (RKE) transmitter programming process requires conducting the programming sequence with all the transmitters present at the same time. Begin by using an RKE transmitter or the door lock control switch while keeping the driver door open. The programming mode entry requires the
Ignition Switch to transition eight times between OFF to RUN in less than ten seconds while ending on RUN. When successful the system will perform a door lock-unlock cycle. Fast press any button on all RKE transmitters to both lock and unlock the doors during the next 20 seconds as part of the confirmation process. Press the button once more after waiting for a few seconds if the door locks do not answer. The Inspection and Verification process should be checked for any possible maximum RKE transmitter count violation. The programming process completes by turning the key to OFF position or through time passage of twenty seconds after entering program mode or after programming the last transmitter or surpassing the maximum transmitter count.