How to service and repair exhaust heat shields on Ford Expedition?

Yard workers should start exhaust heat shield servicing by placing the car onto a hoist while driving in neutral. During inspection check for both lost or lacking heat shields and trapped debris between exhaust components and their heat shields. Silicone worm gear clamps F0TZ-5A231-A and W705949-S300 must be used to fasten loose heat shields which should be tightened to 7 Nm (62 inch lbs.) while trimming the clamp's excess ear. New heat shields or exhaust system components need replacement when any heat shield is absent from the system.

OEM Ford Expedition Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

32 Exhaust Heat Shields found

View related parts
Ford Expedition Exhaust Shield, Driver Side Part Number: XL3Z5G221MA
$6.23 MSRP: $8.62
You Save: $2.39 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Left; Exhaust Heat Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford Expedition Heat Shield, Passenger Side Part Number: FL3Z-5E258-A
$90.68 MSRP: $132.00
You Save: $41.32 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Right; Exhaust Heat Shield; Converter Shield
- Manufacturer Note: Clamps Not Serviced Dealer To Improvise
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Heat Shield, Inner Passenger Side Part Number: 7L1Z-5E258-AB
$53.17 MSRP: $81.67
You Save: $28.50 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Right Lower Inner; Exhaust Heat Shield; Converter Shield; Upper Shield
- Position: Inner Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Upper Shield, Passenger Side Part Number: 7L1Z-5G221-A
$48.11 MSRP: $72.05
You Save: $23.94 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield; Floor Pan Heat Shield, Front Right; Exhaust Heat Shield, Upper
- Position: Upper Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Heat Shield, Driver Side Part Number: 2L1Z-9Y427-CA
Product Specifications
- Other Name: Shield - Exhaust Manifold Heat; Exhaust Manifold Heat Shield, Left; Exhaust Heat Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Expedition | Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Shield, Driver Side Part Number: 2L1Z-5G221-AA
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Left; Exhaust Heat Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Expedition | Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Shield, Driver Side Part Number: 5L1Z-5G221-DA
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Left; Exhaust Heat Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, XLS, XLT, XLT Sport | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Shield Part Number: F75Z5290BB
Product Specifications
- Other Name: Shield; Exhaust Heat Shield
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Shield, Driver Side Part Number: F75Z-5G221-DA
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Left; Exhaust Heat Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Shield, Passenger Side Part Number: F75Z5G221EF
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Right; Exhaust Heat Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Shield, Driver Side Part Number: F75Z5G221FG
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Left; Exhaust Heat Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Shield, Driver Side Part Number: F75Z5G221ZA
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Left; Exhaust Heat Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford Expedition Exhaust Shield Part Number: XL1Z5A273AA
Product Specifications
- Other Name: Shield; Exhaust Heat Shield
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Shield Part Number: XL1Z5N207BA
Product Specifications
- Other Name: Shield Assembly; Exhaust Heat Shield
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1998-1999 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Shield, Rear Passenger Side Part Number: XL3Z-5G221-CA
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Right; Exhaust Heat Shield
- Manufacturer Note: Shield asy. - exhaust system - rear - RH - California - 1999/
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford Expedition Exhaust Shield, Passenger Side Part Number: XL3Z-5G221-EA
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Right; Exhaust Heat Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Shield, Passenger Side Part Number: XL3Z-5G221-GA
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Right; Exhaust Heat Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Shield, Driver Side Part Number: XL3Z-5G221-HA
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Left; Exhaust Heat Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Shield, Passenger Side Part Number: XL3Z-5G221-JA
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Right; Exhaust Heat Shield
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford Expedition Exhaust Shield, Driver Side Part Number: XL3Z-5G221-KA
Product Specifications
- Other Name: Shield; Catalytic Converter Heat Shield, Left; Exhaust Heat Shield
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS

| Page 1 of 2 |Next >

1-20 of 32 Results

Ford Expedition Exhaust Heat Shield

OEM Exhaust Heat Shield boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Exhaust Heat Shield with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Ford Expedition Exhaust Heat Shield is one of the core parts of the car's mechanism and rightly symbolizes the dependability and efficiency of the Ford Expedition series. Being an insulating barrier of heat, it helps in the quick exit of gases in the exhaust system hence minimizing the intake temperature and thus improving the power ratio. Coming in as the Ford Expedition Exhaust Heat Shield, the component is responsible for cutting temperatures from under the hood by approximately 50% hence keeping the delicate parts of different models of the expedition well protected. Due to the fact that it has compatibility with various types of Expedition vehicles particularly with the exhaust heat sheilds for expedition, muffler heat shields and dedicated sheilds for the rear and driver side of expedition vehicles, makes it rather versatile. A common issue which relates to its operation is the Scraping situation when the Exhaust Heat Shield fails to maintain operations correctly and will scrape against other parts of the car weakening the vehicle. The Ford Expedition can be considered a classic car of sorts, as even today it looks and feels like its initial models - unaltered for the most part. This commitment to quality is seen in the following performance of the Exhaust Heat Shield whereby it boosts the efficiency of the car and at the same time increasing the safety feature of the Ford Expedition. Due to this, Ford Expedition Exhaust Heat Shield comes as one of the most important features in the automotive market aimed at efficient heat management to strengthen the Expedition's image of a strong and powerful full-size SUV.

Ford Expedition Exhaust Heat Shield Parts and Q&A

Exhaust Shield, Driver Side
5L1Z-5G221-DA
Q: How to service and repair exhaust heat shields on Ford Expedition?
A:
Yard workers should start exhaust heat shield servicing by placing the car onto a hoist while driving in neutral. During inspection check for both lost or lacking heat shields and trapped debris between exhaust components and their heat shields. Silicone worm gear clamps F0TZ-5A231-A and W705949-S300 must be used to fasten loose heat shields which should be tightened to 7 Nm (62 inch lbs.) while trimming the clamp's excess ear. New heat shields or exhaust system components need replacement when any heat shield is absent from the system.