How to service and repair the dual converter Exhaust Pipe on Ford Expedition?

You should start with servicing or repairing the Y-pipe dual converter when the vehicle remains in neutral position on a hoist. First disconnect both heated oxygen and catalyst monitor sensors before discarding the catalytic converter-to-exhaust manifold nuts and loosening the clamp. Follow proper protocol for the LH converter while you separate and remove it since damage can occur to manifold outlet flare or converter inlet flare or converter studs. Use suitable jack stands to suspend the muffler before removing bolt and flax nuts along with isolator cap from RH converter. Heat-resistant sensors for oxygen and catalyst monitoring should be taken off if needed while applying anti-seize lubrication to their threaded components before placing them back. The fastener tightening process must start at the vehicle front while all components remain uninstalled. The outlet flare from the manifold requires cleaning before application of new fasteners along with gaskets to both parts. The installation order begins with tightening the RH lower catalytic converter-to-exhaust manifold nut followed by the RH upper catalytic converter-to-exhaust manifold nut then the transmission mount hanger bolt followed by the exhaust clamp nut and finally the LH outer catalytic converter-to-exhaust manifold nut LH inner catalytic converter-to-exhaust manifold nut and complete with catalytic converter-to-muffler bolts.

OEM Ford Expedition Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

28 Exhaust Pipes found

View related parts
Ford Expedition Tail Pipe Extension Part Number: 7L1Z-5K238-A
$76.00 MSRP: $105.14
You Save: $29.14 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Extension - Exhaust Pipe; Exhaust Tip; Tail Pipe; Extension Pipe; Exhaust Pipe
- Manufacturer Note: Chrome Finish
- Replaces: 7L1Z-5255-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Exhaust Pipe Part Number: GL7Z-5201-A
$550.59 MSRP: $724.03
You Save: $173.44 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Resonator; Tail Pipe; Muffler; Resonator & Pipe
- Replaces: FL1Z-5201-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: JL1Z-5201-A
$312.13 MSRP: $410.45
You Save: $98.32 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Muffler; Rear Muffler
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | King Ranch, Limited, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Muffler W/Tpipe, Front Part Number: 4L7Z-5230-A
$339.37 MSRP: $446.27
You Save: $106.90 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly - Front; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Position: Front
- Replaces: 4L1Z-5230-AA, 3L7Z-5230-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford Expedition | Eddie Bauer, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: 8L1Z-5202-A
$210.34 MSRP: $274.18
You Save: $63.84 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Extension Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Catalytic Converter, Passenger Side Part Number: NL1Z-5E212-A
$787.48 MSRP: $2490.71
You Save: $1703.23 (69%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Converter Assembly
- Position: Passenger Side
- Replaced by: NL1Z-5E212-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: JL1Z-5201-B
$367.06 MSRP: $482.69
You Save: $115.63 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Muffler; Rear Muffler
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: 4L1Z-5K238-AA
$106.48 MSRP: $144.90
You Save: $38.42 (27%)
ADD TO CART
Product Specifications
- Other Name: Extension - Exhaust; Exhaust Intermediate Pipe; Exhaust Pipe; Extension Pipe; Extension - Exhaust Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Muffler & Pipe Part Number: JL1Z-5230-E
$461.95 MSRP: $607.46
You Save: $145.51 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly; Exhaust Muffler; Exhaust Pipe; Muffler
- Replaces: JL1Z-5230-C, JL1Z-5230-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2021 Ford Expedition | King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Muffler & Pipe Part Number: NL1Z-5230-B
$702.90 MSRP: $932.54
You Save: $229.64 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly; Muffler
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: JL7Z-5201-H
$524.37 MSRP: $689.55
You Save: $165.18 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Muffler; Rear Muffler
- Replaces: JL7Z-5201-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | Max King Ranch, Max Limited, Max Platinum, Max XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Muffler & Pipe Part Number: NL1Z-5230-A
$626.18 MSRP: $830.75
You Save: $204.57 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly; Muffler
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | King Ranch, Limited, Platinum, SSV, Timberline, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: JL7Z-5201-E
$561.83 MSRP: $738.81
You Save: $176.98 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Rear Muffler
- Replaces: JL7Z-5201-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | Limited, Platinum, SSV, Timberline, XL STX | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Muffler & Pipe Part Number: NL7Z-5230-B
$1590.19 MSRP: $2109.70
You Save: $519.51 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler Assembly; Muffler
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | Limited, Platinum, SSV, Timberline, XL STX | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Muffler W/Tpipe, Rear Part Number: 1L1Z-5230-AA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Exhaust Pipe; Muffler
- Manufacturer Note: Muffler asy. - Expedition - with resonator - 2001/
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: 5L1Z-5202-AA
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Intermediate Pipe; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Extension Pipe
- Replaces: 2L1Z-5202-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Muffler W/Tpipe Part Number: 6L7Z-5230-AB
Product Specifications
- Other Name: Kit; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, XLS, XLT, XLT Sport | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Muffler W/Tpipe, Rear Part Number: F75Z-5230-NF
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Exhaust Pipe; Muffler
- Manufacturer Note: Muffler asy. - 1997/1998
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS
View related parts
Ford Expedition Muffler W/Tpipe, Rear Part Number: F85Z-5230-KA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Exhaust Pipe; Muffler
- Manufacturer Note: Muffler asy. - Expedition - 1998
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1997-1998 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Muffler W/Tpipe, Rear Part Number: XL1Z-5230-CA
Product Specifications
- Other Name: Muffler And Pipe Assembly; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Manufacturer Note: Muffler asy. - Expedition - less resonator - 1999/2001
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

| Page 1 of 2 |Next >

1-20 of 28 Results

Ford Expedition Exhaust Pipe

OEM Exhaust Pipe boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Exhaust Pipe with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Exhaust Pipe is a crucial part that speaks volumes on the Ford Expedition series of cars. The Exhaust Pipe can be an integration of manifold, catalytic converter or even the muffler and basically functions as the passage for the exhaust gases. With great detail, the Exhaust Pipe has the header pipes for inline engines and the y pipes for v type engines in improving the flow and efficiency of exhaust. This particular aspect not only optimizes the moisture that is dealing with the performance but also goes a long way in enhancing the safety of the Ford Expedition concerning emissions management. The Exhaust Pipe can be installed on the car models of Expedition since its production in 1997 and up to the current models showing that it is flexible and has not undergone any radical change in design. Such features as mandrel bending do away with pipe diameters that are constricted and at the same time increase the vehicle's performance. Exhaust Pipe plays a very important role as yet another aspect that requires little attention from the users, and this has made the Ford Expedition to be known for its longevity. This makes the Exhaust Pipe among the integral car parts distinguishing the brand as a market leader in the automotive industry since the Ford Expedition exhaust pipe guarantees efficiency in the automobile market. To this day, the Exhaust Pipe retains its defensiveness as a well-built, carefully designed element of any car.

Ford Expedition Exhaust Pipe Parts and Q&A

Tail Pipe
4L1Z-5K238-AA
Q: How to service and repair the dual converter Exhaust Pipe on Ford Expedition?
A:
You should start with servicing or repairing the Y-pipe dual converter when the vehicle remains in neutral position on a hoist. First disconnect both heated oxygen and catalyst monitor sensors before discarding the Catalytic Converter-to-Exhaust Manifold nuts and loosening the clamp. Follow proper protocol for the LH converter while you separate and remove it since damage can occur to manifold outlet flare or converter inlet flare or converter studs. Use suitable jack stands to suspend the Muffler before removing bolt and flax nuts along with isolator cap from RH converter. Heat-resistant sensors for oxygen and catalyst monitoring should be taken off if needed while applying anti-seize lubrication to their threaded components before placing them back. The fastener tightening process must start at the vehicle front while all components remain uninstalled. The outlet flare from the manifold requires cleaning before application of new fasteners along with gaskets to both parts. The installation order begins with tightening the RH lower catalytic converter-to-exhaust manifold nut followed by the RH upper catalytic converter-to-exhaust manifold nut then the transmission mount hanger bolt followed by the exhaust clamp nut and finally the LH outer catalytic converter-to-exhaust manifold nut LH inner catalytic converter-to-exhaust manifold nut and complete with catalytic converter-to-muffler bolts.