How to Service and Repair the Tail Pipe and Muffler on Ford Expedition?

The first step for tailpipe and muffler servicing requires placing the vehicle into neutral position on a hoist. Remove the 6 bolts securing the transfer case skid plate when such equipment exists. Open the Torca® clamp which connects the tailpipe to the resonator until it is loose from the muffler assembly. Expedition models require the tailpipe removal and Navigator models need the resonator removal after disconnecting its 2 isolator and bracket assembly bolts. A suitable jackstand will secure the muffler while you detach the 2 bolts that link the exhaust Y-pipe dual catalytic converter to the muffler assembly. Separate the isolators from the muffler assembly while keeping away from axle boots before rerouting the muffler assembly outlet above the rear axle to prevent any damage from occurring. The installation process requires cleaning of the mating surfaces on the exhaust Y-pipe dual catalytic converter to muffler assembly and an evaluation of exhaust hanger isolators. Replace worn out isolators after inspection. Mount the muffler assembly and fasten its isolators before securing both bolts that join the exhaust Y-pipe dual catalytic converter to the muffler assembly. Begin by installing the outer bolt securely before torquing the inner bolt to 63 Nm (46 lb-ft) followed by adjusting the outer bolt to meet the same specification. Complete the installation by securing the tailpipe from Expedition models through the isolator and 2 bracket assembly bolts which should be tightened to 25 Nm (18 lb-ft). Navigator models require the resonator installed with similar bolt procedure. Complete the Torca® clamp connecting the tailpipe or resonator to the muffler assembly at a torque of 48 Nm (35 lb-ft). Perform the exhaust system alignment procedure when the exhaust system isolators measure anything other than zero load in their position. Install the transfer case skid plate by screwing in its 6 bolts to a torque of 25 Nm (18 lb-ft).

OEM Ford Expedition Tail Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Tail Pipes found

View related parts
Ford Expedition Tail Pipe Part Number: JL1Z-5201-A
$312.13 MSRP: $410.45
You Save: $98.32 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Muffler; Rear Muffler
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | King Ranch, Limited, Platinum, SSV, Timberline, XL, XL STX, XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Exhaust Pipe Part Number: GL7Z-5201-A
$550.59 MSRP: $724.03
You Save: $173.44 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Resonator; Tail Pipe; Muffler; Resonator & Pipe
- Replaces: FL1Z-5201-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Exhaust Pipe Part Number: FL1Z-5201-B
$652.16 MSRP: $865.22
You Save: $213.06 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Resonator; Tail Pipe; Muffler; Resonator & Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2015-2017 Ford Expedition | EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, King Ranch, Limited, Platinum, SSV, XL, XLT | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: 8L1Z-5202-A
$210.34 MSRP: $274.18
You Save: $63.84 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Direct-Fit Exhaust; Exhaust System Kit; Extension Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: 7L1Z-5202-AB
$124.81 MSRP: $162.69
You Save: $37.88 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Extension Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: JL7Z-5201-H
$524.37 MSRP: $689.55
You Save: $165.18 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Muffler; Rear Muffler
- Replaces: JL7Z-5201-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | Max King Ranch, Max Limited, Max Platinum, Max XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: JL7Z-5201-E
$561.83 MSRP: $738.81
You Save: $176.98 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Rear Muffler
- Replaces: JL7Z-5201-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2022-2024 Ford Expedition | Limited, Platinum, SSV, Timberline, XL STX | 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: 4L1Z-5K238-AA
$106.48 MSRP: $144.90
You Save: $38.42 (27%)
ADD TO CART
Product Specifications
- Other Name: Extension - Exhaust; Exhaust Intermediate Pipe; Exhaust Pipe; Extension Pipe; Extension - Exhaust Pipe
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2004-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Tail Pipe Part Number: JL1Z-5201-B
$367.06 MSRP: $482.69
You Save: $115.63 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Exhaust; Exhaust Pipe; Muffler; Rear Muffler
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2024 Ford Expedition | Max King Ranch, Max Limited, Max Platinum, Max SSV, Max XL, Max XLT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Ford Expedition Tail Pipe Extension Part Number: 7L1Z-5K238-A
Product Specifications
- Other Name: Extension - Exhaust Pipe; Exhaust Tip; Tail Pipe; Extension Pipe; Exhaust Pipe
- Manufacturer Note: Chrome Finish
- Replaces: 7L1Z-5255-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2014 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XL, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

Ford Expedition Tail Pipe

OEM Tail Pipe boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Tail Pipe with long life and a perfect fit. Come to our website and find genuine Ford Expedition parts. We keep a wide inventory of OEM Expedition parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

The Tail Pipe is an exhaust system element of the Ford Expedition lasting and professionally shaped to convey gases out of the engine to the rear of the vehicle, thereby contributing to effective venting of the atmosphere. The Tail Pipe is a well-constructed part that complements the functionality of the Expedition lineup, improving not only the performance, but also the safety of the vehicle. Different designs of tail pipes have been incorporated in several lost expedition models which have incorporated straight and angled cuts for additional flamboyant chrome tips that improve the looks of the model. Depending on the functional demand, Tail Pipe design may slightly differ, some having the exhaust outlet running through the bumper and other designs use vertical pipes to prevent formation of dust cloud. This versatility reflects that Ford Expedition is keen to its performance and the satisfaction of the users. Also, the Tail Pipe has significant uses in the durability of the automobile as illustrated by its importance in Survey of longest-lasting cars in 2016 claiming that the Ford Expedition has been very durable. By offering the Tail Pipe, the company has a chance to reinforce its vehicles' performance and give men a unique part that contributes to the vehicle's safety, making it stand out from other automobiles available on the market. In general, the Tail Pipe is a perfect example of commitment to quality, efficient performance and stylish design, which the Ford Expedition sets in the category of full-sized SUVs.

Ford Expedition Tail Pipe Parts and Q&A

Tail Pipe Extension
7L1Z-5K238-A
Q: How to Service and Repair the Tail Pipe and Muffler on Ford Expedition?
A:
The first step for tailpipe and muffler servicing requires placing the vehicle into neutral position on a hoist. Remove the 6 bolts securing the transfer case skid plate when such equipment exists. Open the Torca® clamp which connects the tailpipe to the resonator until it is loose from the muffler assembly. Expedition models require the tailpipe removal and Navigator models need the resonator removal after disconnecting its 2 isolator and bracket assembly bolts. A suitable jackstand will secure the muffler while you detach the 2 bolts that link the exhaust Y-pipe dual Catalytic Converter to the muffler assembly. Separate the isolators from the muffler assembly while keeping away from axle boots before rerouting the muffler assembly outlet above the rear axle to prevent any damage from occurring. The installation process requires cleaning of the mating surfaces on the exhaust Y-pipe dual catalytic converter to muffler assembly and an evaluation of exhaust hanger isolators. Replace worn out isolators after inspection. Mount the muffler assembly and fasten its isolators before securing both bolts that join the exhaust Y-pipe dual catalytic converter to the muffler assembly. Begin by installing the outer bolt securely before torquing the inner bolt to 63 Nm (46 lb-ft) followed by adjusting the outer bolt to meet the same specification. Complete the installation by securing the tailpipe from Expedition models through the isolator and 2 bracket assembly bolts which should be tightened to 25 Nm (18 lb-ft). Navigator models require the resonator installed with similar bolt procedure. Complete the Torca® clamp connecting the tailpipe or resonator to the muffler assembly at a torque of 48 Nm (35 lb-ft). Perform the exhaust system alignment procedure when the exhaust system isolators measure anything other than zero load in their position. Install the transfer case skid plate by screwing in its 6 bolts to a torque of 25 Nm (18 lb-ft).