Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2012-2019 Ford Explorer | Base, Limited, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
| Page 1 of 5 |Next >
1-20 of 83 Results
Ford Explorer Cooling Hose
Welcome to our website where you can discover high-quality, genuine Ford Explorer Cooling Hose. We offer an extensive inventory of OEM Ford Explorer Cooling Hose at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Ford Explorer Cooling Hose Parts Questions & Experts Answers
Q: How to Service and Repair the Cooling Hose for the Coolant Crossover Manifold Assembly on Ford Explorer?
A: Construction and repair work on the coolant crossover manifold starts with disconnecting the ground cable from the battery and draining the engine cooling system. Before beginning detachment of the belt from the generator pulley start by removing the Intake Manifold while rotating the accessory drive belt tensioner clockwise. Before connecting the electrical connector, install new nuts on the generator and fasten them to 25 Nm (18 ft. lbs.). The generator, bracket and wiring harness assembly should be placed aside while you install the bracket-to-coolant crossover bolts at 10 Nm (89 inch lbs.). Separate the components of heater hose and upper radiator hose along with PCV heater hose from coolant crossover manifold assembly. The bolts securing the coolant crossover manifold assembly require removal but the workers need to throw away the gaskets. Use new gaskets for replacement while tightening bolts to 10 Nm (89 inch lbs.). You should execute the reverse procedure which finalizes the installation of the vehicle system.