Other Name: Fender Assembly - Front; Fender, Front Right
Position: Front Passenger Side
Replaced by: RB5Z-16005-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
Other Name: Fender Assembly - Front; Fender, Front Left
Manufacturer Note: L.H., , Eddie Bauer, Limited, XLS, XLT , with wheel lip mouldings
Position: Front Driver Side
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1999-2001 Ford Explorer | Eddie Bauer, Limited, Postal, XL, XL Fleet, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 5.0 L GAS
| Page 1 of 2 |Next >
1-20 of 26 Results
Ford Explorer Fender
OEM Fender boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fender with long life and a perfect fit. Come to our website and find genuine Ford Explorer parts. We keep a wide inventory of OEM Explorer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.
Q: How to service and repair the front fender on Ford Explorer?
A:
Service and repair of the front fender starts by detaching the grille opening panel reinforcement and the front Bumper (17757). Start by removing the front panel of the rocker panel trim or the running board (s) if the vehicle has them and proceed to take off the front wheel with tire. Members of the service team need to detach the front fender apron (16054) by unscrewing the screws and bolts before lower fender to rocker panel bolts go along with spacers. The fender bolt can be accessed through an open front door whereby you should also extract the fender bolt and fender to front fender radiator support brace bolt. For removing the right-hand front fender the speed control servo (9C735) requires movement to another location after bolt removal as well as antenna removal. Begin the front fender (16005) removal by detaching its top fender to inner fender bolts. To install start by mounting the front fender then use top fender to inner fender bolts for securing it. The right-hand front fender reinstallation requires positioning the speed control servo bracket with the antenna and bolt installation. To connect the fender with the front fender radiator support brace bolt maintain full access through the open front door for top fender to inner fender bolt insertion. Implement the fender to rocker panel bolts together with spacers before positioning the front fender apron and sealing it with front fender to front fender apron screws and top fender to inner fender bolts. The repair ends with the installation of front wheel and tire assembly together with the front panel of the rocker panel trim when present and the front bumper and grille opening panel reinforcement.