How to Safely Service and Properly Install a Fuel Filler Hose on Ford Explorer?

Servicing the fuel tank filler pipe requires you to use caution because of its highly flammable mixtures so keep fuel-related components away from open flames and smoking areas. Fuel tank liquid and vapor outlets must receive protection through caps or tape installations until the equipment is ready for final installation. Start by putting the vehicle into neutral position on a hoist before unfastening the battery ground cable. Start by removing the fuel tank filler cap while you use a wrench to remove and then reinstall its three retaining bolts with proper torque of 2 Nm (18 lb-in). Professional care should be applied to extract the vapor tube from the fuel filler pipe housing when accessing through the wheel well space of early build vehicles. Late build vehicles need users to push down tabs located on the fuel vapor vent tube which operates inside the fuel filler door pocket to remove the tube from the inner fenderwell. Proceed by disconnecting the fuel pressure sensor fitting of the fuel filler pipe vapor tube along with the rear axle vent hose and dust separator hose. To install the assembly properly tighten the two mounting bolts to 20 Nm (15 lb-ft) while following the same order of steps for removal. Begin by loosening and disconnecting the hose from the fuel filler pipe's clamp then removing the bolts and finally tightening the fuel filler pipe's clamp during reinstallation. Following the removal steps you should reverse the process to achieve successful installation.

OEM Ford Explorer Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Fuel Filler Hoses found

View related parts
Ford Explorer Filler Neck Part Number: BB5Z-9034-G
$183.36 MSRP: $266.90
You Save: $83.54 (32%)
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Neck; Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe
- Replaces: BB5Z-9034-F, BB5Z-9034-A, BB5Z-9034-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford Explorer | Base, Limited, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Filler Tube Part Number: 8U5Z-17B068-B
$6.11 MSRP: $8.67
You Save: $2.56 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Funnel; Fuel Filler Neck Adapter; Fuel Filler Neck Sleeve; Filler Neck Sleeve; Fuel Filler Hose; Fuel Tank Filler; Filler Pipe Tube; Tube; Filler
- Manufacturer Note: Attached To Underneath 42624 In Luggage Compartment
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2023 Ford Explorer | Base, Eddie Bauer, King Ranch, Limited, Limited Hybrid, Platinum, Sport, ST, ST-Line, Timberline, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
Ford Explorer Filler Hose, Lower Part Number: DA8Z-9047-A
$47.54 MSRP: $68.02
You Save: $20.48 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Filler Pipe; Fuel Filler Neck, Lower; Fuel Filler Hose
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Vent Tube Part Number: DA8Z-9C047-A
$188.32 MSRP: $320.00
You Save: $131.68 (42%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Tube - Fuel Feed; Evaporative Emissions System Lines; PCV Valve Hose; EGR Tube; Return Hose; Canister Hose; Tube
- Manufacturer Note: Part Includes 9C052 Pressure Transducer
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2019 Ford Explorer | Base, Limited, Platinum, Sport, XLT | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Ford Explorer Filler Hose, Lower Part Number: L1MZ-9047-A
$54.98 MSRP: $78.65
You Save: $23.67 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose - Filler Pipe; Fuel Filler Hose, Lower; Fuel Filler Neck, Lower; Fuel Filler Hose
- Position: Lower
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Limited Hybrid, Platinum, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Filler Neck Part Number: L1MZ-9034-AJ
$307.59 MSRP: $451.67
You Save: $144.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Hose; Filler Pipe
- Replaces: L1MZ-9034-AM, L1MZ-9034-V, L1MZ-9034-K, L1MZ-9034-M, L1MZ-9034-W, L1MZ-9034-E, L1MZ-9034-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Base, King Ranch, Limited, Platinum, ST, ST-Line, Timberline, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
Ford Explorer Filler Neck Part Number: L1MZ-9034-Y
$294.65 MSRP: $432.67
You Save: $138.02 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Hose; Fuel Tank Filler Neck; Filler Pipe
- Replaces: L1MZ-9034-Z, L1MZ-9034-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2023 Ford Explorer | Limited Hybrid | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Filler Pipe Part Number: L1MZ-9034-B
$300.89 MSRP: $441.83
You Save: $140.94 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe - Fuel Filler; Fuel Filler Hose; Fuel Tank Filler Neck
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020 Ford Explorer | Limited Hybrid | 6 Cyl 3.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
Ford Explorer Filler Hose Part Number: 4L2Z-9047-AA
Product Specifications
- Other Name: Hose - Filler Pipe; Fuel Filler Hose; Filler Neck Hose; Fuel Hose; Hose
- Replaces: 1L2Z-9047-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2010 Ford Explorer | Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

Ford Explorer Fuel Filler Hose

OEM Fuel Filler Hose boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Fuel Filler Hose with long life and a perfect fit. Come to our website and find genuine Ford Explorer parts. We keep a wide inventory of OEM Explorer parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

It is a fuel system component that is used in the Explorers to facilitate delivery of fuel to the tank whilst at the same time providing the much needed safety. Screws and clamps are to be used to connect this Fuel Filler Hose to the fuel fill cap inlet, thus guaranteeing a stable connection that will increase the performance of the Ford Explorer. It is suitable for numerous Explorer models, which makes it an application that is regarded as critical for preserving the fuel system's integrity, even across generation variations. In the case of the Ford Explorer, with rattling off roads and comfortable family-like properties in its design, the Fuel Filler Hose delivers high reliability in negation of fuel efficiency and safety. Due to the secure installation of the Fuel Filler Hose, any leakage that may be prone to 'the Ford Explorer is reduced and thus the vehicle can run smoothly and efficiently. Also, the Fuel Filler Hose is designed to have standard high-strength, giving it a competitive advantage when compared to the other auto parts. Not only in this sense does this component improve the Ford Explorer, but in another way, ensures the Ford Explorer its status as the premier selling SUV in the United States of America. In summary, the Fuel Filler Hose displays the company's dedication to durability and efficiency, meaning that it is an irreplaceable component of the Ford Explorer.

Ford Explorer Fuel Filler Hose Parts and Q&A

Filler Hose
4L2Z-9047-AA
Q: How to Safely Service and Properly Install a Fuel Filler Hose on Ford Explorer?
A:
Servicing the fuel tank filler pipe requires you to use caution because of its highly flammable mixtures so keep fuel-related components away from open flames and smoking areas. Fuel tank liquid and vapor outlets must receive protection through caps or tape installations until the equipment is ready for final installation. Start by putting the vehicle into neutral position on a hoist before unfastening the battery ground cable. Start by removing the fuel tank filler cap while you use a wrench to remove and then reinstall its three retaining bolts with proper torque of 2 Nm (18 lb-in). Professional care should be applied to extract the vapor tube from the fuel filler pipe housing when accessing through the wheel well space of early build vehicles. Late build vehicles need users to push down tabs located on the fuel vapor vent tube which operates inside the fuel filler door pocket to remove the tube from the inner fenderwell. Proceed by disconnecting the fuel pressure sensor fitting of the fuel filler pipe vapor tube along with the rear axle vent hose and dust separator hose. To install the assembly properly tighten the two mounting bolts to 20 Nm (15 lb-ft) while following the same order of steps for removal. Begin by loosening and disconnecting the hose from the fuel filler pipe's clamp then removing the bolts and finally tightening the fuel filler pipe's clamp during reinstallation. Following the removal steps you should reverse the process to achieve successful installation.