Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Right; Front Speed Sensor
Position: Front Passenger Side
Replaces: BRAB-580, LC3Z-2C204-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2020-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left; Front Speed Sensor
Position: Front Driver Side
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2020-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left; ABS Speed Sensor; ABS Sensor; ABS Wheel Speed Sensor
Manufacturer Note: LH, 4x2, FROM 6/26/98
Position: Front Driver Side
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
1999 Ford F-250 Super Duty | Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
| Page 1 of 2 |Next >
1-20 of 29 Results
Ford F-250 Super Duty ABS Sensor
Welcome to our website where you can discover high-quality, genuine Ford F-250 Super Duty ABS Sensor. We offer an extensive inventory of OEM Ford F-250 Super Duty ABS Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Q: How to Service the Front ABS Sensor for a 4x2 on Ford F-250 Super Duty?
A: To service the front ABS sensor of a 4x2 first disconnect the electrical connector. Then disconnect sensor cable on the brake hose clips. Unscrew the bolt on the front ABS sensor (part A) and remove the sensor (part B). Installation is just a reversal steps of the one taken at the time of removal.