What precautions should be taken when servicing the air bag control module on Ford F-250 Super Duty?

Always put on safety glasses during air bag control module servicing to prevent accidental injuries that may occur. A correct directional placement of the restraints control module (RCM) ensures proper functioning of the air bag supplemental restraint system (SRS). Following accidents that affect the center tunnel of the vehicle you should inspect the RCM bracket along with its mounting to check for damage and consider an RCM replacement even if the air bags were not deployed. The area containing the RCM needs to return to its original state. After a collision it is necessary to inspect SRS component sensors including their mounting bracket and wiring pigtail for any signs of deformation. All damaged SRS parts need to be replaced and should be correctly mounted. The use of memory saver devices should be avoided for personal injury prevention. Electronic modules easily suffer harm when exposed to static electricity. The RCM fuse removal under ON ignition status will result in air bag warning lamp illumination but this condition indicates no SRS fault. A vehicle should only be returned to the customer after fully testing that the SRS operates correctly without any faults. The repair process involves part installation but a repeat diagnostic procedure using the original component should occur when the issue remains unresolved. First depower the system before taking out the RCM cover by removing its retaining clips. Disconnection of the RCM starts by unlocking then removing its electrical connector and retaining bolts. The RCM setup requires positioning the device before installing two bolts until they reach a torque of 12 Nm (9 lb-ft). Install the bolt of the RCM then secure it at 12 Nm (9 lb-ft) torque and attach the electrical connector before securing the locking clip. The RCM cover should be fitted after the system starts without preliminary operation tests. Prior to putting a new RCM into use you must program it using diagnostic tools to stop the appearance of incorrect DTCs. A proper SRS proof requires users to switch the ignition key to OFF then wait 10 seconds before returning it to ON while they inspect the air bag indicator for proper operation. The indicator will activate a continuous light for six seconds until it shuts down. A current fault will either prevent the indicator from lighting up or keep it continuously on while possible chimes signal such issues. The technician should use a diagnostic tool to clear all permanent DTCs stored in the RCM.

OEM Ford F-250 Super Duty Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Air Bag Control Modules found

View related parts
Ford F-250 Super Duty Control Module
Part Number: HC3Z-14B321-B
$475.47 MSRP: $698.20
You Save: $222.73 (32%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Module
- Replaces: HC3Z-14B321-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2019 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: DC3Z-14B321-D
$441.81 MSRP: $648.77
You Save: $206.96 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; SDM Module; Sensor Assembly - Air Bag
- Manufacturer Note: RESTRAINT CONTROL MODULE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: YC3Z-14B321-CA
$257.07 MSRP: $355.64
You Save: $98.57 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Sensor Assembly - Air Bag
- Manufacturer Note: Sensor, module and bracket, FROM 01/23/00 TO 10/02/00
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2000 Ford F-250 Super Duty | Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: PC3Z-14B321-B
$333.07 MSRP: $489.08
You Save: $156.01 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; SDM Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Control Module
Part Number: PC3Z-14B321-A
$324.78 MSRP: $476.92
You Save: $152.14 (32%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; SDM Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Control Module
Part Number: BC3Z-14B321-N
$480.14 MSRP: $705.05
You Save: $224.91 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; SDM Module; Sensor Assembly - Air Bag
- Manufacturer Note: RESTRAINT CONTROL MODULE
- Replaces: BC3Z-14B321-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford F-250 Super Duty | King Ranch, Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: BC3Z-14B321-M
$566.91 MSRP: $839.87
You Save: $272.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; SDM Module; Sensor Assembly - Air Bag
- Manufacturer Note: RESTRAINT CONTROL MODULE
- Replaces: BC3Z-14B321-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford F-250 Super Duty | King Ranch, Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: BC3Z-14B321-L
$372.48 MSRP: $546.97
You Save: $174.49 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; SDM Module; Sensor Assembly - Air Bag
- Manufacturer Note: RESTRAINT CONTROL MODULE
- Replaces: BC3Z-14B321-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford F-250 Super Duty | King Ranch, Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: LC3Z-14B321-A
$440.65 MSRP: $690.88
You Save: $250.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Control Module
Part Number: LC3Z-14B321-B
$108.91 MSRP: $167.60
You Save: $58.69 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Module
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-250 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-250 Super Duty Control Module
Part Number: DC3Z-14B321-E
$441.73 MSRP: $648.65
You Save: $206.92 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; SDM Module; Sensor Assembly - Air Bag
- Manufacturer Note: RESTRAINT CONTROL MODULE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: DC3Z-14B321-A
$261.37 MSRP: $407.12
You Save: $145.75 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; SDM Module; Sensor Assembly - Air Bag
- Manufacturer Note: RESTRAINT CONTROL MODULE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: DC3Z-14B321-B
$269.52 MSRP: $419.82
You Save: $150.30 (36%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; SDM Module; Sensor Assembly - Air Bag
- Manufacturer Note: RESTRAINT CONTROL MODULE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2013-2016 Ford F-250 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: 5C3Z-14B321-BA
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Module; Sensor Assembly - Air Bag
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: AC3Z-14B321-A
$294.28 MSRP: $432.13
You Save: $137.85 (32%)
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Module; Sensor Assembly - Air Bag
- Manufacturer Note: OCC
- Replaces: 8C3Z-14B321-A, 9C3Z-14B321-A, 7C3Z-14B321-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-250 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: 4C3Z-14B321-BA
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Sensor Assembly - Air Bag
- Manufacturer Note: Sensor, module and bracket, FROM 11/04/03 TO 8/23/04
- Replaces: 3C3Z-14B321-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2004 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: 1C3Z-14B321-BA
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Module; Sensor Assembly - Air Bag
- Manufacturer Note: Sensor, module and bracket, FROM 10/02/00 TO 11/04/02
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2001-2004 Ford F-250 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: YC3Z-14B321-BA
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; Diagnostic Module; Sensor Assembly - Air Bag
- Manufacturer Note: Sensor, module and bracket, BEFORE 01/23/00
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2000 Ford F-250 Super Duty | Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-250 Super Duty Control Module
Part Number: BC3Z-14B321-K
$88.69 MSRP: $129.10
You Save: $40.41 (32%)
Product Specifications
- Other Name: Sensor Assembly - Airbag; Air Bag Control Module; SDM Module; Sensor Assembly - Air Bag
- Manufacturer Note: RESTRAINT CONTROL MODULE
- Replaces: BC3Z-14B321-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2012 Ford F-250 Super Duty | King Ranch, Lariat, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL

Ford F-250 Super Duty Air Bag Control Module

Welcome to our website where you can discover high-quality, genuine Ford F-250 Super Duty Air Bag Control Module. We offer an extensive inventory of OEM Ford F-250 Super Duty Air Bag Control Module at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford F-250 Super Duty Air Bag Control Module Parts Questions & Experts Answers

Control Module
5C3Z-14B321-BA
Q: What precautions should be taken when servicing the air bag control module on Ford F-250 Super Duty?
A: Always put on safety glasses during air bag control module servicing to prevent accidental injuries that may occur. A correct directional placement of the restraints control module (RCM) ensures proper functioning of the air bag supplemental restraint system (SRS). Following accidents that affect the center tunnel of the vehicle you should inspect the RCM bracket along with its mounting to check for damage and consider an RCM replacement even if the air bags were not deployed. The area containing the RCM needs to return to its original state. After a collision it is necessary to inspect SRS component sensors including their mounting bracket and wiring pigtail for any signs of deformation. All damaged SRS parts need to be replaced and should be correctly mounted. The use of memory saver devices should be avoided for personal injury prevention. Electronic modules easily suffer harm when exposed to static electricity. The RCM fuse removal under ON ignition status will result in air bag warning lamp illumination but this condition indicates no SRS fault. A vehicle should only be returned to the customer after fully testing that the SRS operates correctly without any faults. The repair process involves part installation but a repeat diagnostic procedure using the original component should occur when the issue remains unresolved. First depower the system before taking out the RCM cover by removing its retaining clips. Disconnection of the RCM starts by unlocking then removing its electrical connector and retaining bolts. The RCM setup requires positioning the device before installing two bolts until they reach a torque of 12 Nm (9 lb-ft). Install the bolt of the RCM then secure it at 12 Nm (9 lb-ft) torque and attach the electrical connector before securing the locking clip. The RCM cover should be fitted after the system starts without preliminary operation tests. Prior to putting a new RCM into use you must program it using diagnostic tools to stop the appearance of incorrect DTCs. A proper SRS proof requires users to switch the ignition key to OFF then wait 10 seconds before returning it to ON while they inspect the air bag indicator for proper operation. The indicator will activate a continuous light for six seconds until it shuts down. A current fault will either prevent the indicator from lighting up or keep it continuously on while possible chimes signal such issues. The technician should use a diagnostic tool to clear all permanent DTCs stored in the RCM.