How to service and repair the inner drag link on F-250 and F-350 Rear Wheel Drive on Ford F-350 Super Duty?

Service and repairs for the inner drag link of F-250 and F-350 RWD vehicles begin with wheel position alignment at straight-ahead and hoist lift placement in NEUTRAL gear mode. When installing the outer adjusting sleeve clamp nut tighten it to 55 Nm (41 lb-ft) while loosening it first. First place the steering wheel in straight-ahead position then hoist the vehicle into NEUTRAL gear before removing the steering linkage damper-to-drag link bracket nut along with bolt and placing the damper safely aside for reinstallation with a torque of 90 Nm (66 lb-ft). Discard the inner tie-rod end cotter pin before removing its nut retainer and nut and tighten the nut to 175 Nm (129 lb-ft) during replacement. A Steering Arm Remover tool helps disconnect the inner tie-rod end from the inner drag link before placing the tie rod to the side. The installation process of the nut requires a torques setting of 175 Nm (129 lb-ft) after removing the inner drag link cotter pin, nut retainer and nut. Record the number of turns needed to detach the inner drag link and adjusting sleeve before physically separating the inner drag link through the sector shaft arm while removing the assembly of inner drag link with adjusting sleeve. The remaining adjusting sleeve clamp nut requires loosening before you tighten it to a torque specification of 55 Nm (41 lb-ft) for installation. All drag link and tie-rod end retainers must be placed properly on their respective nuts before adding cotter pins to keep steering linkage components from failing prematurely. You must clean all corrosion and dirt off the damper surfaces before you install it to maintain leak prevention. After replacement proceed through the removal steps backwards for installation while using new cotter pins and perform necessary adjustments to the toe.

OEM Ford F-350 Super Duty Drag Link

Center Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Drag Links found

View related parts
Ford F-350 Super Duty Drag Link
Part Number: HC3Z-3304-C
$184.35 MSRP: $292.73
You Save: $108.38 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link; Drag Link Repair Kit; Steering Drag Link; Center Link
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Drag Link
Part Number: LC3Z-3304-E
$186.86 MSRP: $296.73
You Save: $109.87 (38%)
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link
- Replaces: BC3Z-3304-A, MDOE-43
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Drag Link
Part Number: LC3Z-3304-H
$280.35 MSRP: $449.09
You Save: $168.74 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link; Center Link
- Replaces: 4C3Z-3304-AD, 3C3Z-3304-DA, 7C3Z-3304-M, 6C3Z-3304-E, F81Z-3304-DD, 4C3Z-3304-AB, AC3Z-3304-M, MDOE-5, MDOE-41
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009, 1999-2006 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-350 Super Duty Center Link
Part Number: LC3Z-3304-D
$224.73 MSRP: $360.00
You Save: $135.27 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link
- Replaces: BC3Z-3304-C, MDOE-45
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Drag Link
Part Number: LC3Z-3304-A
$125.95 MSRP: $200.00
You Save: $74.05 (38%)
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link; Center Link
- Replaces: 6C3Z-3304-B, 7C3Z-3304-B, AC3Z-3304-B, MDOE-3, MDOE-25, MDOE-37
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL
View related parts
Ford F-350 Super Duty Drag Link
Part Number: LC3Z-3304-C
$68.13 MSRP: $108.18
You Save: $40.05 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link; Center Link
- Replaces: 6C3Z-3304-D, 8C3Z-3304-G, MDOE-8, MDF-2, AC3Z-3304-N
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2004 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-350 Super Duty Drag Link
Part Number: LC3Z-3304-F
$264.29 MSRP: $449.09
You Save: $184.80 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link; Center Link
- Replaces: 8C3Z-3304-H, MDOE-29, MDOE-36, 7C3Z-3304-N, AC3Z-3304-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
Ford F-350 Super Duty Center Link, Passenger Side
Part Number: LC3Z-3304-B
$169.56 MSRP: $285.45
You Save: $115.89 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link
- Position: Passenger Side
- Replaces: 5C3Z-3304-CA, 7C3Z-3304-C, AC3Z-3304-C, MDOE-38, 6C3Z-3304-C, MDOE-26, MDOE-4
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2007 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-350 Super Duty Center Link
Part Number: LC3Z-3304-G
$257.87 MSRP: $438.18
You Save: $180.31 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link
- Replaces: 8C3Z-3304-F, AC3Z-3304-E, MDOE-7, MDOE-40
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
View related parts
Ford F-350 Super Duty Drag Link, Driver Side
Part Number: PC3Z-3304-C
$207.71 MSRP: $332.73
You Save: $125.02 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link; Center Link
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Drag Link
Part Number: PC3Z-3304-B
$169.46 MSRP: $269.09
You Save: $99.63 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link; Center Link
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Drag Link, Driver Side
Part Number: PC3Z-3304-A
$185.49 MSRP: $294.55
You Save: $109.06 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link; Center Link
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Drag Link
Part Number: KC3Z-3304-A
$143.64 MSRP: $241.82
You Save: $98.18 (41%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Multiple Supercessions; Drag Link Repair Kit; Center Link
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2019-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Drag Link
Part Number: PC3Z-3304-E
$157.68 MSRP: $265.45
You Save: $107.77 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly - Drag Link; Center Link
- Replaces: PC3Z-3304-D, MDF-31
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | Lariat, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Drag Link, Front
Part Number: HC3Z-3304-B
$138.55 MSRP: $220.00
You Save: $81.45 (38%)
Product Specifications
- Other Name: Multiple Supercessions; Steering Center Link, Front; Drag Link Repair Kit; Steering Drag Link; Center Link; Rod Assembly - Drag Link
- Position: Front
- Replaces: MDOE-44, BC3Z-3304-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Drag Link
Part Number: HC3Z-3304-A
$177.48 MSRP: $281.82
You Save: $104.34 (38%)
Product Specifications
- Other Name: Rod Assembly - Drag Link; Drag Link Repair Kit; Steering Drag Link; Center Link
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Drag Link
Part Number: 8C3Z-3304-D
Product Specifications
- Other Name: Rod Assembly - Drag Link; Drag Link Repair Kit; Steering Drag Link; Center Link
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL

Ford F-350 Super Duty Drag Link

Welcome to our website where you can discover high-quality, genuine Ford F-350 Super Duty Drag Link. We offer an extensive inventory of OEM Ford F-350 Super Duty Drag Link at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford F-350 Super Duty Drag Link Parts Questions & Experts Answers

Drag Link
LC3Z-3304-A
Q: How to service and repair the inner drag link on F-250 and F-350 Rear Wheel Drive on Ford F-350 Super Duty?
A: Service and repairs for the inner drag link of F-250 and F-350 RWD vehicles begin with wheel position alignment at straight-ahead and hoist lift placement in NEUTRAL gear mode. When installing the outer adjusting sleeve clamp nut tighten it to 55 Nm (41 lb-ft) while loosening it first. First place the steering wheel in straight-ahead position then hoist the vehicle into NEUTRAL gear before removing the steering linkage damper-to-drag link bracket nut along with bolt and placing the damper safely aside for reinstallation with a torque of 90 Nm (66 lb-ft). Discard the inner tie-rod end cotter pin before removing its nut retainer and nut and tighten the nut to 175 Nm (129 lb-ft) during replacement. A Steering Arm Remover tool helps disconnect the inner tie-rod end from the inner drag link before placing the tie rod to the side. The installation process of the nut requires a torques setting of 175 Nm (129 lb-ft) after removing the inner drag link cotter pin, nut retainer and nut. Record the number of turns needed to detach the inner drag link and adjusting sleeve before physically separating the inner drag link through the sector shaft arm while removing the assembly of inner drag link with adjusting sleeve. The remaining adjusting sleeve clamp nut requires loosening before you tighten it to a torque specification of 55 Nm (41 lb-ft) for installation. All drag link and tie-rod end retainers must be placed properly on their respective nuts before adding cotter pins to keep steering linkage components from failing prematurely. You must clean all corrosion and dirt off the damper surfaces before you install it to maintain leak prevention. After replacement proceed through the removal steps backwards for installation while using new cotter pins and perform necessary adjustments to the toe.