How to Remove and Replace the Rack and Pinion for 5.4L and 6.8L Engines on Ford F-350 Super Duty?

The initial steps for rack and pinion replacement in 5.4L and 6.8L vehicles require removing the air cleaner outlet pipe and hoisting the vehicle with neutral transmission and straight front wheels. Detach the rack and pinion shield from its line fitting position before shifting it up the bottom steering column shaft. Maintain the steering column shaft stationary when connecting or disconnecting the intermediate shaft because any rotation could harm the Clock Spring. If rotation occurs, the Clock Spring needs to be extracted before readjustment. The lower steering column shaft-to-rack and pinion bolt removal allows for disconnecting the lower steering column shaft from the rack and pinion. Secure the bolt with a 48 Nm (36 lb-ft) torque setting during reinstallation. The return hose-to-rack and pinion fitting gets disconnected while discarding the O-ring seal, then torquing the new fitting to 35 Nm (26 lb-ft). Follow the same procedure for the pressure line-to-rack and pinion fitting while discarding its O-ring seal, then applying 35 Nm (26 lb-ft) torque. You should remove the cotter pin, retainer cap, and inner drag link-to-sector shaft arm nut before tightening the nut to 175 Nm (129 lb-ft). The inner drag link needs disconnection from the sector shaft arm using the Steering Arm Remover tool. Professionals should detach the three rack and pinion securing bolts on F-250/350 models before reinstalling new bolts tightly secured at 165 Nm (122 lb-ft). Remove the three bolts from F-450/550 vehicles and replace them with new bolts, which should be tightened to 300 Nm (221 lb-ft). The sector shaft arm-to-sector shaft nut requires immediate disposal before the addition of a new nut, which needs to be torqued to 475 Nm (350 lb-ft). The F-250/350 vehicles need the Steering Arm Remover to separate the sector shaft arm, but F-450/550 vehicles require the Differential Bearing Remover with two Grade 8 bolts measuring 90 mm (3.54 inches) for this task. Proper installation of new O-ring seals on pressure and return line/hose fittings will stop fluid leaks before completing the installation procedure for new components and filling the power steering system.

OEM Ford F-350 Super Duty Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Rack And Pinions found

View related parts
Ford F-350 Super Duty Steering Gear Part Number: YC3Z-3504-ABRM
$297.59 MSRP: $476.36
You Save: $178.77 (38%)
ADD TO CART
Product Specifications
- Other Name: Remanufactured Gear Assembly - Steering; Steering Gear Box; Steering Gearbox; Gear Assembly
- Replaces: YC3Z-3D517-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2002 Ford F-350 Super Duty | Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-350 Super Duty Steering Gear Part Number: 2C3Z-3504-AARM
$271.38 MSRP: $443.64
You Save: $172.26 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Remanufactured Gear Assembly - Steering; Steering Gear Box; Steering Gearbox; Gear Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2002-2004 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-350 Super Duty Steering Gear Part Number: GC3Z-3504-E
$742.76 MSRP: $1225.45
You Save: $482.69 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly - Steering; Steering Gear Box; Steering Gearbox; Gear Assembly
- Replaces: BC3Z-3504-B, STG-427, GC3Z-3504-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2019, 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Steering Gear Part Number: GC3Z-3504-D
$782.18 MSRP: $1290.91
You Save: $508.73 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Gear Assembly - Steering; Steering Gear Box; Steering Gearbox
- Replaces: BC3Z-3504-A, STG-425, GC3Z-3504-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2018-2019, 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Steering Gear Part Number: HC3Z-3504-E
$840.21 MSRP: $1387.27
You Save: $547.06 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly - Steering; Steering Gear Box; Steering Gearbox; Gear Assembly
- Replaces: 5C3Z-3504-BA, 7C3Z-3504-BA, STG-462, 8C3Z-3504-B, HC3Z-3504-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2011-2016 Ford F-350 Super Duty | King Ranch, Lariat, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL
View related parts
Ford F-350 Super Duty Steering Gear Part Number: 8C3Z-3504-CRM
$469.73 MSRP: $756.36
You Save: $286.63 (38%)
ADD TO CART
Product Specifications
- Other Name: Remanufactured Gear Assembly - Steering; Steering Gear Box; Steering Gearbox; Gear Assembly; Gear Assembly - Steering
- Manufacturer Note: Remanufactured
- Replaces: DC3Z-3504-G, STG-454, STG-465, 8C3Z-3504-C, DC3Z-3504-D, STG-286
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
Ford F-350 Super Duty Steering Gear Part Number: LC3Z-3504-D
$651.90 MSRP: $1040.00
You Save: $388.10 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly - Steering; Gear Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Steering Gear Part Number: HC3Z-3504-L
$575.40 MSRP: $916.36
You Save: $340.96 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly - Steering; Gear Assembly
- Replaces: HC3Z-3504-J, STG-504
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Steering Gear Part Number: HC3Z-3504-J
$575.40 MSRP: $916.36
You Save: $340.96 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly - Steering; Steering Gear Box; Steering Gearbox
- Replaced by: HC3Z-3504-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Steering Gear Part Number: F7UZ-3504-GBRM
$282.83 MSRP: $461.78
You Save: $178.95 (39%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Remanufactured Gear Assembly - Steering; Steering Gear Box; Steering Gearbox; Gear Box; Gear Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999 Ford F-350 Super Duty | Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-350 Super Duty Sector Shaft, Front Part Number: F6AZ-3575-AA
$132.49 MSRP: $183.29
You Save: $50.80 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft - Steering Gear Sector; Steering Gear Sector Shaft, Front; Pitman Shaft; Shaft & Sector
- Position: Front
- Replaces: EOAZ-3575-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1999-2004 Ford F-350 Super Duty | Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
Ford F-350 Super Duty Steering Gear Part Number: LC3Z-3504-A
$565.28 MSRP: $900.00
You Save: $334.72 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly - Steering; Steering Gearbox; Gear Assembly
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2023-2024, 2020-2021 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Steering Gear Part Number: HC3Z-3504-G
$636.54 MSRP: $1049.09
You Save: $412.55 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly - Steering; Steering Gear Box; Steering Gearbox; Gear Assembly
- Replaces: HC3Z-3504-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Steering Gear Part Number: HC3Z-3504-F
$737.28 MSRP: $1216.36
You Save: $479.08 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly - Steering; Steering Gear Box; Steering Gearbox; Gear Assembly
- Replaces: HC3Z-3504-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2022 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Steering Gear Part Number: HC3Z-3504-K
$573.83 MSRP: $985.45
You Save: $411.62 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly - Steering; Gear Assembly
- Replaced by: HC3Z-3504-N
- Replaces: HC3Z-3504-H, STG-470, STG-486, HC3Z-3504-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2017-2024 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Steering Gear Part Number: HC3Z-3504-H
$573.83 MSRP: $985.45
You Save: $411.62 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly - Steering; Steering Gear Box; Steering Gearbox
- Replaced by: HC3Z-3504-N
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2020-2022, 2017 Ford F-350 Super Duty | King Ranch, Lariat, Limited, Platinum, XL, XLT | 8 Cyl 6.2 L FLEX, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
Ford F-350 Super Duty Steering Gear Part Number: 8C3Z-3504-ARM
$484.15 MSRP: $768.00
You Save: $283.85 (37%)
Product Specifications
- Other Name: Remanufactured Gear Assembly - Steering; Steering Gear Box; Steering Gearbox; Gear Assembly; Gear Assembly - Steering
- Manufacturer Note: Remanufactured
- Replaces: DC3Z-3504-F, STG-464, 8C3Z-3504-A, DC3Z-3504-C, STG-284, STG-453
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008-2010 Ford F-350 Super Duty | Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford F-350 Super Duty Steering Gear Part Number: 7C3Z-3504-BRM
$501.86 MSRP: $796.36
You Save: $294.50 (37%)
Product Specifications
- Other Name: Remanufactured Gear Assembly - Steering; Steering Gear Box; Steering Gearbox; Gear Assembly; Gear Assembly - Steering
- Manufacturer Note: Remanufactured
- Replaces: 7C3Z-3504-B, DC3Z-3504-B, STG-263, STG-452, DC3Z-3504-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2008 Ford F-350 Super Duty | FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 8 Cyl 6.4 L DIESEL
View related parts
Ford F-350 Super Duty Steering Gear Part Number: 7C3Z-3504-ARM
$362.25 MSRP: $572.73
You Save: $210.48 (37%)
Product Specifications
- Other Name: Remanufactured Gear Assembly - Steering; Steering Gear Box; Steering Gearbox; Gear Assembly
- Replaces: 7C3Z-3504-A, STG-262, 6C3Z-3504-AB, STG-292
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2008 Ford F-350 Super Duty | FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL

Ford F-350 Super Duty Rack And Pinion

OEM Rack And Pinion boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Rack And Pinion with long life and a perfect fit. Come to our website and find genuine Ford F-350 Super Duty parts. We keep a wide inventory of OEM F-350 Super Duty parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Among these parts, the Ford F-350 Super Duty Rack And Pinion stands out as among the most crucial parts that symbolize the strength of the company. This steering system helps in converting the rotational motion of the steering wheel into lateral motion of the front wheels so that the drivers can have full control of the car even in a poor road condition. The present models of Ford F-350 Super Duty have gone through four generations after the models were first produced in 1999; their power-assisted rack and pinion steering mechanisms improve ease of steering and sensitiveness. This feature is even more useful for those who engage in heavy-duty applications whether it is while towing or when on off-road. The Ford F-350 Super Duty Rack And Pinion is install-able with different models to guarantee that the motorists will enjoy the benefits provided by the sturdy constituent component and its practicality in the said range of vehicles. However, other aspects of rack and pinion consist of components like straight as well as helical gears although straight gears are extensively used as they work more efficiently and produce lesser temperature level. Another chic creation entails the Ford F-350 Super Duty that features the latest technologies in safety such as the antilock brake and the stability control, all incorporated in the trucks' rack and pinion system for enhanced safety while driving. The Rack And Pinion in the Ford F-350 Super Duty is among the prime when it comes to automotive Rack And Pinion due to its strength and performance it provides to car owners making it very vital if you need the optimal in your car.

Ford F-350 Super Duty Rack And Pinion Parts and Q&A

Steering Gear
8C3Z-3504-ARM
Q: How to Remove and Replace the Rack and Pinion for 5.4L and 6.8L Engines on Ford F-350 Super Duty?
A:
The initial steps for rack and pinion replacement in 5.4L and 6.8L vehicles require removing the air cleaner outlet pipe and hoisting the vehicle with neutral transmission and straight front wheels. Detach the rack and pinion shield from its line fitting position before shifting it up the bottom steering column shaft. Maintain the steering column shaft stationary when connecting or disconnecting the intermediate shaft because any rotation could harm the Clock Spring. If rotation occurs, the Clock Spring needs to be extracted before readjustment. The lower steering column shaft-to-rack and pinion bolt removal allows for disconnecting the lower steering column shaft from the rack and pinion. Secure the bolt with a 48 Nm (36 lb-ft) torque setting during reinstallation. The return hose-to-rack and pinion fitting gets disconnected while discarding the O-ring seal, then torquing the new fitting to 35 Nm (26 lb-ft). Follow the same procedure for the pressure line-to-rack and pinion fitting while discarding its O-ring seal, then applying 35 Nm (26 lb-ft) torque. You should remove the cotter pin, retainer cap, and inner drag link-to-sector shaft arm nut before tightening the nut to 175 Nm (129 lb-ft). The inner drag link needs disconnection from the sector shaft arm using the Steering Arm Remover tool. Professionals should detach the three rack and pinion securing bolts on F-250/350 models before reinstalling new bolts tightly secured at 165 Nm (122 lb-ft). Remove the three bolts from F-450/550 vehicles and replace them with new bolts, which should be tightened to 300 Nm (221 lb-ft). The sector shaft arm-to-sector shaft nut requires immediate disposal before the addition of a new nut, which needs to be torqued to 475 Nm (350 lb-ft). The F-250/350 vehicles need the Steering Arm Remover to separate the sector shaft arm, but F-450/550 vehicles require the Differential Bearing Remover with two Grade 8 bolts measuring 90 mm (3.54 inches) for this task. Proper installation of new O-ring seals on pressure and return line/hose fittings will stop fluid leaks before completing the installation procedure for new components and filling the power steering system.