How to service the muffler and tailpipe assembly on Ford Five Hundred?

When replacing the muffler and tailpipe assembly, make sure that the exhaust system is cool. Isolators should be avoided with oil based lubricants. Installation Place the car in neutral on a hoist, hold the assembly and loosen the Torca clamp. Check and change isolators when necessary and replace and tighten parts to recommended torque.

OEM Ford Five Hundred Muffler

Exhaust Muffler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mufflers found

View related parts
Ford Five Hundred Rear Muffler Part Number: 6G1Z-5230-B
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Position: Rear
- Replaces: 5G1Z-5230-D, 5G1Z-5230-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS
View related parts
Ford Five Hundred Rear Muffler Part Number: 6G1Z-5230-A
Product Specifications
- Other Name: Muffler And Pipe Assembly - Rear; Exhaust Muffler; Direct-Fit Exhaust; Exhaust System Kit; Exhaust Pipe; Muffler
- Position: Rear
- Replaces: 5G1Z-5230-A, 5G1Z-5230-C, 5G1Z-5230-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2005-2007 Ford Five Hundred | Limited, SE, SEL | 6 Cyl 3.0 L GAS

Ford Five Hundred Muffler

Welcome to our website where you can discover high-quality, genuine Ford Five Hundred Muffler. We offer an extensive inventory of OEM Ford Five Hundred Muffler at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Five Hundred Muffler Parts and Q&A

Rear Muffler
6G1Z-5230-B
Q: How to service the muffler and tailpipe assembly on Ford Five Hundred?
A: When replacing the muffler and tailpipe assembly, make sure that the exhaust system is cool. Isolators should be avoided with oil based lubricants. Installation Place the car in neutral on a hoist, hold the assembly and loosen the Torca clamp. Check and change isolators when necessary and replace and tighten parts to recommended torque.