How to service the Auxiliary Temperature Blend Door Actuator on Ford Flex?

In order to service Auxiliary Temperature Blend Door Actuator, commence the removal of the LH quarter trim panel. Lift the red electrical connector and unscrew the locking tab. Next, unscrew the two screws to the actuator and take it out. Installation is achieved by simply reversing the steps done in removing.

How to service the RH Temperature Blend Door Actuator on Ford Flex?

In order to service the RH Temperature Blend Door Actuator, one needs to lower the glove compartment and reach the actuator. Disconnect the electrical connector, unscrew the wire harness retainer and unscrew the actuator. Unplug its electrical connector, unscrew the actuator, and screw the new one in by reversing the process.

OEM Ford Flex Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Blend Door Actuators found

View related parts
Ford Flex Door Actuator, Rear Part Number: AE9Z-19E616-A
$48.03 MSRP: $80.49
You Save: $32.46 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator, Rear; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Adjust Motor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2010-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Door Actuator, Driver Side Part Number: AA5Z-19E616-C
$28.03 MSRP: $44.51
You Save: $16.48 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator, Front Lower; Front; Air Adjustment Control Motor; Right; Left; Vacuum Motor; Adjust Motor; Motor
- Position: Driver Side
- Replaces: 8G1Z-19E616-B, 8G1Z-19E616-C, AA5Z-19E616-B, YH-1778
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Door Actuator, Front Upper Part Number: AA5Z-19E616-A
$18.80 MSRP: $29.85
You Save: $11.05 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator, Front Upper; Defrost Mode Door Actuator; Heater Blend Door Actuator; Vacuum Motor; Adjust Motor; Motor
- Position: Front Upper
- Replaces: 7L1Z-19E616-G, 9L3Z-19E616-A, 5F2Z-19E616-AA, 4F2Z-19E616-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009-2019 Ford Flex | Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
Ford Flex Door Actuator, Rear Part Number: 8A8Z-19E616-A
Product Specifications
- Other Name: Motor Assembly; HVAC Air Inlet Door Actuator, Rear; HVAC Heater Blend Door Actuator; HVAC Blend Door Actuator; Motor
- Position: Rear
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2009 Ford Flex | Limited, SE, SEL | 6 Cyl 3.5 L GAS

Ford Flex Blend Door Actuator

Welcome to our website where you can discover high-quality, genuine Ford Flex Blend Door Actuator. We offer an extensive inventory of OEM Ford Flex Blend Door Actuator at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Flex Blend Door Actuator Parts and Q&A

Door Actuator, Front Upper
AA5Z-19E616-A
Q: How to service the Auxiliary Temperature Blend Door Actuator on Ford Flex?
A: In order to service Auxiliary Temperature Blend Door Actuator, commence the removal of the LH quarter trim panel. Lift the red electrical connector and unscrew the locking tab. Next, unscrew the two screws to the actuator and take it out. Installation is achieved by simply reversing the steps done in removing.
Door Actuator, Rear
8A8Z-19E616-A
Q: How to service the RH Temperature Blend Door Actuator on Ford Flex?
A: In order to service the RH Temperature Blend Door Actuator, one needs to lower the glove compartment and reach the actuator. Disconnect the electrical connector, unscrew the wire harness retainer and unscrew the actuator. Unplug its electrical connector, unscrew the actuator, and screw the new one in by reversing the process.